ホーム 製品 エンクロージャー Sugo Series SG04-FH
   
 
EXTERIOR PICTURES
 
 
 
 
製品紹介
Sugoは美しいラインで形作られた、小型でかつパワフルな洗練のSFFケースの代名詞ですが、SilverStoneのSugo SG04-FHは確かに洗練されたケースです。風格のあるSugo SG03モデルをたたき台として、SG04-FHは以前の仕様からユーザの持つ印象に至る、ケースのあらゆる側面を改良しています。拡大スロットの追加および取り付け方向を変えられる電源のインストール設計を有するSG04-FHは、2枚のグラフィック・カード(10.5インチ)動作をサポートできる優れた冷却性能を持っています。調整可能なファン位置により、雑音を有効に減少させるのを助けるフロントドアと共に、ユーザが必要に応じて適した冷却レイアウトを決めるのを可能にします。 数々の親切設計により、SG04-FHはSFFエンクロージャの新たな基準としてふさわしい内容となっています。

 
 
製品特徵
  • 2台の120mm冷却ファンが設置可能なスペース
  • デュアルCPUマザーボード対応可能な冷却性能
  • 2枚の10.5”グラフィックスカードに対応
  • 驚くべき拡張性能
  • 1500W電源対応
  • 最大210mmの光学ドライブが設置可能
  • 上部取付のアルミダイキャストハンドル


FEATURE PHOTOS
 
 
Extra fifth expansion slot for greater flexibility
Die-cast aluminum handle bar on top panel designed for carrying
Aluminum front panel and door with steel body construction
Micro-ATX motherboard compatibility
 
One full-size 5.25” drive bay support with stealth cover
Standard ATX/PS2 power supply compatibility
 
Two quiet 120mm fans included with meshed front panel
Four standard expansion slots for dual high-end graphics cards
 
One external 3.5” drive bay support
Two internal 3.5” drive cages serves dual purpose as foot stands
Convenient door flap for hiding front I/O ports, reset button, and 3.5” bay
SG04-FH Feature list
型番
SST-SG04B-FH(ブラック、ハンドル)
--
--
--
材質
アルミニウムフロントパネル、0.8mmSECCボディ
マザーボード
Micro-ATX 266.7 mm (w) x 243.84 mm (h)
マルチメディア
--
ドライブベイ
外部 5.25” x 1
3.5” x 1 (compatible with 3.5” HDD)
内部 3.5” x 2
冷却システム
前面 2 x 120mmファン、1200rpm, 19dBA
背面 オプション装備クロスフローファン
サイド --
トップ --
底面 --
内部 --
拡張スロット
5
フロント I/O ポート
USB 2.0ポートx 2
オーディオx 1
マイク x 1
電源
オプション装備標準PS2(ATX)
オペレーティングシステムサポート
--
グラフィックス カード
最大10.5インチの拡張カードに対応, width restriction-5.78"
Limitation of CPU cooler
82mm
Limitation of PSU
Unlimited
実重量
6.01kg
寸法
200 mm (w) x 417 mm (h) x 347 mm (d), 28.9 liters
その他
--

Recommended SilverStone products
NT06-PRO
CPU cooler designed for SFF. 更多...
FN121-BL
Equip your SG04-FH with FN121-BL for added lighting effect in available 120mm fan slots. 更多...
Suscool121
Equip your SG04-FH with Suscool121 for the ultimate combination of quietness performance. 更多...
PP05
Combine PP05 with a compatible Strider series PSU for the ultimate SFF power source. 更多...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 更多...
Sugo Pack
Get a Sugo Pack to conveniently take your SG04-FH anywhere you go. 更多...
Describe
Ver
Size
ダウンロード
SG04-FH Manual
1.0
4,496 KB


 

  • Q. USB 3.0 Cable Upgrade Guide
    A:

    1. Loosen two thumbscrews located on the right side of SG04-FH and detach side-panel gently.
         

    2. Loosen three screws near front I/O module and detach it gently.
         

    3. Install USB 3.0 front I/O module (part number: G11303260) with included new plastic holder and secure with two screws.
         

    4. Assemble parts back in reverse order carefully. Your case is now USB3 ready.
         


もし上記の回答は問題を解決できない場合、メールsupport@silverstonetek.comご利用してください。
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.