Home Products Chassis Sugo Series SG07
   
 
EXTERIOR PICTURES
  
 
 
 
INTRODUCTION
The Sugo SG07, with a size that slots in between the venerable SG01 Micro-ATX SFF case from 2005 and the SG05, a powerful Mini-ITX case released in 2009, was designed to take the Mini-ITX platform to a whole new level. It is twice as powerful as the SG05 but only 37% bigger. Its custom 600W power supply, which is rated up to 50℃with 80 PLUS Bronze level efficiency and single +12V rail, was carefully chosen and optimized for SG07. Exhaustive testing was conducted to create unique VGA fan duct and exhaust vents that enable SG07 to not only accommodate the longest consumer graphics cards physically (up to 12.2 inches/310mm) but also capable of supporting graphics thermal profile of up to 400W through overclocking. For the CPU and motherboard area, a record-breaking use of 180mm fan (bigger than the Mini-ITX motherboard!) with vortex generating design was utilized to provide possibility of fanless CPU cooling of up to 95W (via CPU cooler such as SilverStone’s NT06-E). But despite having tremendous amount of cooling performance, the SG07 is easy to maintain as well. It employs positive pressure layout with all intake areas fitted with removable filters so dust will not accumulate inside. If the goal is to make the ultimate Mini-ITX system, the SG07 is hard to beat.

 
 
SPECIAL FEATURES
  • Class leading SFF chassis with 180mm fan and positive pressure cooling
  • Ample space for CPU cooling (117mm in height)
  • Elevated standoff for motherboard back side components
  • Support for two 2.5” SSD/hard drives and one 3.5” hard drive
  • Includes 80 PLUS Bronze certified 600W@50℃ PSU with single +12V rail
  • Adjustable VGA fan duct for improved cooling efficiency
  • Removable fan filters included for case fan, PSU, and VGA duct
  • Support graphics cards up to 12.2 inches and 400W


FEATURE PHOTOS
  
 
REMARK

AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 6990 – 12"
AMD Radeon HD 6970 – 11"
AMD Radeon HD 6950 – 11"
NVIDIA GeForce GTX690 – 11"
AMD Radeon HD 6870 – 10.5"
NVIDIA GeForce GTX580 – 10.5"
NVIDIA GeForce GTX680 – 10"
NVIDIA GeForce GTX670 – 9.5"
AMD Radeon HD 6850 – 9"
  
 
One Air Penetrator 180mm fan (AP181) included for superior cooling performance
Slide-out removable top 180mm fan filter included
Constructed with steel body and plastic front panel with aluminum plate
Dual speed fan switch and reset button on rear panel
 
One slim optical drive bay included
 
Accommodates one 3.5” hard drive and two 2.5” hard drives or SSDs
Two full size expansion slots accommodates top-end graphics card up to 12.2” long
 
Custom 600W PSU (80 PLUS Bronze certified) with short cables included
Supports Mini-DTX and Mini-ITX motherboards
GPU vent divider prevents air exhaust recycling back into PSU
PSU filter included
SG07 Feature list
Model No.
 SST-SG07B(black)
SST-SG07B-W(black+window)
SST-SG07B-USB3.0(black)
SST-SG07B-W-USB3.0(black+window)
Material
 Plastic front panel with aluminum plate, SECC body
Motherboard
 DTX, Mini-ITX
Multimedia
 --
Drive Bay
 External Slim optical x 1
--
Internal 3.5” x 1 , 2.5”x 2
Cooling System
 Front --
Rear --
Side VGA fan duct with oversized vents
Top 180mm Air Penetrator 700/1200rpm, 18/34dBA
Bottom PSU intake vents and VGA exhaust divider
Internal --
Expansion Slot
 2
Front I/O Port
 USB 2.0 x 2 (SST-SG07B, SST-SG07B-W only)
USB 3.0 x 2 (SST-SG07B-USB3.0, SST-SG07B-W-USB3.0 only)
Audio x 1
MIC x 1
Power Supply
 Custom 600W with 80 PLUS Bronze certification and single +12V rail
Operating system support
 --
Expansion Card
 Support expansion cards up to 12.2 inches, width restriction-4.38"
Limitation of CPU cooler
 117mm
Limitation of PSU
 140mm (remove VGA Card if you want install up to 170mm)
Net Weight
 4.9kg (SG07B)
5kg (SG07B-W)
Dimension
 222 mm (w) x 190 mm (h) x 350 mm (d), 14.8 liters
Extra
 --

Remark
AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 5870 – 11"
NVIDIA GeForce GTX480 – 10.5"
AMD Radeon HD 5850 – 9.5"
NVIDIA GeForce GTX470 – 9.5"


Model No.
SST-ST60F-SG
Max. DC Output
600W
                 Load Range
 
 +3.3V +5V +12V1 +12V2 +12V3 +12V4 +5VSB -12V -5V
Max.(Amps)
 25A 25A 46A / / / 3.0A 0.8A /
Min.(Amps)
 0.8A 0.5A 4A / / / 0.1A 0A /
Range (%)
 +/-5% +/-5% +/-5% / / / +/-5% +/-10% /
Ripple(mVp-p)
 50mV 50mV 120mV / / / 50mV 120mV /
combined +3.3, +5V
140W
combined +12V
46A / 552W
Input Voltage
90V ~ 265V(Auto Range)
Input Frequency Range
47Hz ~ 63Hz
PFC
Active PFC (PF>0.95 at full load)
Efficiency
82%~85% at 20%~100% loading
MTBF
100,000 hours at 25°C, full load
Operating temperature
10°C ~ 50°C
Protection
Over Current Protection
Over power Protection
Over Voltage Protection
Under Voltage Protection
Short Circuit Protection
Connectors
1 x 24 / 20-Pin Motherboard connector （670mm）
1 x 8 / 4-Pin EPS / ATX 12V connector （670mm）
1 x 8/6-Pin PCIE connector （360mm）
1 x 8/6-Pin PCIE connector （380mm）
3 x SATA connector （350mm + 130mm + 150mm）
2 x 4-Pin Peripheral connector （350mm + 100mm）
Color
Black （Lead-Free Paint）
Cooling System
Single 120mm fan
Noise Level
19 dBA - 30dBA
Dimension
150 mm (W) x 86 mm (H) x 140 mm (D)
Weight
940g
Form factor
Certification
80 PLUS Bronze
Other
Recommended SilverStone products
SOD02
SOD02 is a slot-loading slim DVD burner with included SATA adapter and cable. more information...
NT06-PRO
CPU cooler designed for SFF. more information...
AP181
Equip your chassis with AP181 as the intake fan for extreme cooling performance. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
CP08
SATA III cable with non-scratch locking mechanism and 90° connector more information...
Describe
Ver
Size
Download
SG07 Manual
v1.0
3,151 KB


 
  • Q. How to install the NVIDIA GeForce GTX 480 in the SG07?
    A:
    • If GTX 480 is installed into the SG07 directly, the fan will not install correctly because the GTX 480’s heat pipes will interfere with the brace holding the fan.





    • Overlooking the case from the top, the heat pipes do not make contact with the frame so there is enough space to install GTX 480 in the SG07.




    • By removing the brace from the fan, the GTX 480 can be installed with the fan frame touching the heat pipes slightly.
  • Q. How do I choose the right CPU cooler for my SG07?
    A: The SG07 is a Mini-ITX case with unprecedented cooling capability. To fully take advantage of this, users can purchase larger aftermarket CPU cooler.

    We firstly recommend getting motherboards such as DFI’s LANParty MI P55-T36 for use in the SG07. Its CPU socket location enables it to accommodate various aftermarket coolers including some tower style ones.


    If you need to use H55 based Mini-ITX boards such as Zotac’s H55-ITX WiFi that has CPU socket very close to the PCI-E slot, then the CPU cooler choices will be more limited.


    We have tested several aftermarket CPU coolers and found that the Thermalright AXP-140 to be compatible with H55 based Mini-ITX motherboard. Please refer to the following photos for example of a build with this CPU cooler and motherboard combination:

    (Special note: The 120mm fan installed on top of the CPU cooler is for reference only, it is not required for safe operation as SG07’s included AP181 on top of the case can provide enough cooling to support CPU up to 95W power level.)
  • Q. Why there is no response when I turn on the power button.
    A: There is a power switch located directly on SG07's power supply and it maybe in the "off" position. The switch is located next to the power cord connector on the power supply, please check it and make sure it is in the "on" position.
  • Q. USB 3.0 Cable Upgrade Guide.
    A:

    1. Loosen three screws located on the back of SG07.
         

    2. Push top-cover in the direction as shown gently and finally pull up to detach the top-cover
         

    3. Loosen four screws located on optical drive bracket and detach it gently.
         

    4. Loosen two screws located on hard drive bracket and detach it gently.
         

    5. Unplug power cord.
         

    6. Loosen two screws near front I/O module and detach it gently.
         

    7. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
         

    8. Assemble parts back in reverse order carefully.
         Your case is now USB3 ready.
         


If the answers don't solve your problem, please email to support@silverstonetek.com. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.