堡垒系列     FT03-MINI



■ 超迷你的截面积与机壳周围无线材

■ 充裕的空间设计给CPU散热(散热器限高:82mm)

■ 加长型主机板螺柱可支持主机板背部装置组件

■ 搭配14公分风扇同时兼容入门级水冷散热

■ 支持2.5英寸与3.5英寸硬盘

■ 兼容于Mini-DTX/Mini-ITX主机板与SFX电源

■ 支持标准长度扩充卡(10寸)

         轻巧、省电的Mini-ITX计算机是未来的消费趋势之一,银欣将FT03机壳体积再缩减,开发出全新FT03-MINI超迷你机箱。保留FT03简洁美感的同时,让体积更为小巧。以最大厚度达2.5mm的全铝喷砂外壳、无任何线材破坏的优雅外观,再搭配FT03-MINI超迷你的截面积能大幅增加空间利用率;毫无疑问地,FT03-MINI为Mini-ITX机箱,创立了全新的标准。
          机壳内部采用银欣引以为傲的烟囱式散热架构,透过将Mini-ITX主机板旋转90度达成自然界中最具效率的热对流散热。此外,FT03-MINI在如此玲珑的体积下,还能规划出,最大兼容10吋 (254mm) 的扩充卡插槽以及支持1颗3.5英寸与2颗2.5英寸的硬盘槽,同时还能安装入门级的水冷散热产品。FT03-MINI不只小巧,也能兼顾专业玩家们的扩充需求,作为堡垒系列的最新机种,FT03-MINI将成为最受注目的超迷你机箱。




备注
显示卡长度参考:
ATI Radeon HD 4850/4830 - 9”
NVIDIA GeForce 9800GT - 9"
NVIDIA GeForce 9600GT/GSO - 9"
NVIDIA GeForce 8800GS/GT/GTS - 9"
NVIDIA GeForce GTX 680 - 10"
 


型号 SST-FT03B-MINI (黑)
SST-FT03S-MINI (银)
--
--
材质 铝外罩, 铁机身
主机板 Mini-DTX, Mini-ITX
磁盘架 外露 12.7mm吸入式薄型光驱x 1
--
隐蔵 3.5” x 1 , 2.5”x2
散热系统 --
--
侧边 --
顶部 --
底部 1 x 140mm 进风风扇 1500rpm
内部 --
扩展槽 2
前置 I/O USB 3.0 x 2
Audio x 1
MIC x 1
电源 1 x Optional standard SFX
显示卡 可相容于10" (254mm) 长扩充卡, 宽度-5.11" (129mm)
处理器散热器限高 82mm
电源供应器深度限制 SFX PSU
净重 4.7kg
尺寸 188.9mm (W) x 397mm (H) x 235.1 mm(D), 17.6 公升


CP08
SATA III cable with non-scratch locking mechanism and 90° connector 更多...
CLEARCMOS
Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. 更多...
AR06
先进热导管直触薄型CPU散热器 更多...
NT06-PRO
CPU cooler designed for SFF. 更多...
ST45SF
SFX ST45SF is smaller and has shorter cables to enable additional room inside the case 更多...
ST45SF-G
SFX PSU with 80 PLUS Gold efficiency and 100% modular cables 更多...
SX500-G
标准SFX电源之典范 更多...
SX600-G
SFX尺寸电源的全新里程碑 更多...
SX650-G
标准SFX电源之典范 更多...
SOD03
9.5mm SATA 8X内接吸入式薄型DVD刻录机 更多...
 
 
描述
版本
大小
下载
FT03-MINI 說明書
 v1.0 
4,576 KB
     
FT03-MINI 高分辨率照片
  
2,120 KB
     


FT03-MINI eDM (CN-FT03-MINI-EDM.pdf)
 
356 KB

A:以目前Intel规画的ITX而言,大部分主机板的CPU位置都过于靠近PCIE插座,导致一般120mm以上规格的空冷散热器都无法正常安 装。虽然一般而言顶级的空冷散热器效果会强于水冷,但是那是在同等风扇规模为前提。而目前的状况是这些ITX主机板最多使用到 92mm规模的空冷散热器。而水冷系统则不会受到主机板步局的限制,你可以将水冷排安装在底部。所以经过我们测试,水冷系统比较 适合在FT03-MINI。

A:There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:

Motherboard:

The orientation of an enthusiast motherboard in a normal ATX case


The orientation of an enthusiast motherboard in the FT03-MINI

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the FT03-MINI, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler


Good orientation Good orientation Bad orientation


Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler


The illustration here shows a VGA cooler that will not work well in the FT03-MINI because the heat source side (touching the GPU) ends up being located higher than the other end.