Home Prodotti CASE Lascala Series LC16M
   
 
EXTERIOR PICTURES
  
 
 
 
Introduzione
Con piú di 15 case di tipo HTPC e diversi anni d’esperienza in fatto di sistemi di raffreddamento, gli acclamati ingegneri ed il team di design della SilverStone hanno inventato di nuovo uno standard gia esistente. L’LC16M, attraentemente plasmato, offre delle prestazioni di grande effetto e senza precedenti nel campo dei case del tipo HTPC. Fra queste, la performance di raffreddamento che supera quella della maggior parte dei case a torre, la capacità di adattarsi alle funzioni dei processori di nuova generazione tecnologica ed una capacità di memoria non ancora vista in questo tipo di case. Grazie alla combinazione di queste novità tecnologiche e con le caratteristiche tradizionali degli HTPC come il kit VFD/IR multimediale ed un pannello frontale chiaro e funzionale, l’LC16M diventerà la prima scelta degli appassionati di HTPC.

 
 
Caratteristiche speciali
  • Brillanti dettagli stilistici “home theatre”
  • Sistema di raffreddamento di nuova generazione
  • Eccellente potenziale per operazioni silenziose
  • Tastiera integrata e manopola multifunzionale
  • Capacità di memoria superiore


FEATURE PHOTOS
  
 
Modello nr.
 SST-LC16B-M (Nero, VFD/IR + multimedia), SST-LC16B-M-USB3.0 (Nero , VFD/IR + multimedia)
SST-LC16S-M (Silver, VFD/IR + multimedia), SST-LC16S-M-USB3.0(Silver, VFD/IR + multimedia)
SST-LC16B-MR (Nero , VFD/IR + multimedia + card reader)
SST-LC16S-MR (Silver, VFD/IR + multimedia + card reader)
SST-LC16G-MR (Gold, VFD/IR + multimedia + card reader)
Materiale
 Pannello frontale in alluminio, corpo in acero da 0,8 mm
Scheda madre
 Standard ATX, Micro-ATX
Multimedia
 Multimedia software, remote with on/off function, VFD/IR
Alloggiamento
 Esterno 5.25” x 1
3.5” x 1
Interno 3.5” x 6
sistema di raffreddamento
 Frontale 2 x 92mm or 80mm fan slots
Posteriore 2 ventole da 80mm, 2050rpm, 21dBA
Laterale 1 x 80mm fan slots
Superiore --
Inferiore --
Interno --
Slot d'espansione
 7
porte frontali d'entrata/uscita
 52-in-1 card reader (LC16MR only)
USB 2.0 x 1 (LC16MR only)
USB 2.0 x 4 (LC16M only)
USB 3.0 x 4 (LC16M-USB3.0 only)
IEEE1394 x 1 (LC16MR only)
IEEE1394 x 2 (LC16M only)
Audio x 1
MIC x 1
Alimentatore
 Optional standard PS2(ATX)
Sistemi operativi supportati
 Windows 2000, XP, Vista, 7
Card grafiche
 Support graphic cards up 9.25 inches (8.4 inches with optical drive installed), width restriction-5.51"
Limitation of CPU cooler
 135mm
Limitation of PSU
 Unlimited
Peso netto
 7.6kg
Dimensioni
 425 mm (L x 170mm (A) x 425 mm (S), 30.7 liters
Extra
 --

Remark
＊Card reader support
Smart Media -
SM, SSFDC, SM Ram, XD
Compact Flash -
CF I, CF II, Hitachi Microdrive, IBM Microdrive, Magicstor, HS-CF, Extreme CF, Extreme III CF, Ultra CF, Ultra II CF, Ultra-X CF
Secure Digital-
SD, HS SD, Extreme SD, Extreme III SD, Ultra SD, Ultra II SD, Ultra II SD plus, SD Elite Pro, *Mini-SD, *Micro SD, *T Flash, *C-Flash, SDHC card
Multimedia -
MMCI, MMCII, HS MMC, DV-RS-MMC, *MMC Mobile, *RS MMC, *RS MMC Mobile, *HS RS MMC
Memodery Stick -
MS, MS Magic Gate, MS Pro, MS Pro(MG), Extreme MS Pro, Extreme III MS Pro, HS MS Pro, HS MS MG Pro, MS Select, MS Pro Ultra II, *MS Duo, *MS Duo(MG), *MS Pro Duo, *MS Pro Duo(MG), *HS MS Pro Duo, * HS MS MG Pro Duo, *MS Pro Duo Ultra II, * MS Rom

Recommended SilverStone products
NT01-E
Equip your NT01-E for the ultimate combination of quietness and performance more information...
FN81
Add FN81 for additional cooling in available 80mm fan slots more information...
SUSCOOL81
Equip your LC16M with Suscool 81 for the ultimate combination of quietness and performance. more information...
FP35
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
CP03
CP03 SATA II cable is perfect for any regular SATA devices. more information...
CP04
We recommend CP04 90° degree SATA cable for installing extension expansion card in LC16M. more information...
Describe
Ver
Size
Download
iMON & iMEDIAN user guide
v1.0
1,991 KB
LC16M manual
v1.0
2,059 KB
IR programming information
v1.0
85 KB
VFD/IR module wiring guide
v2.0
215 KB
Pin definition
v1.0
67 KB
Latest driver and software for iMON
v1.0
127,526 KB
Optional rackmount handles
Rackmount handles cannot support the entire weight of the chassis, rackmount tray or other support must be used in conjunction.

Link: Optional Linux driver
http://venky.ws/projects/imon/

 
  • Q. The VFD works, but there are missing pixels
    A: Please check and see if the connector wire behind the VFD is touching the solder points behind the circuit board. If so, please separate them by taping the wire down or place non-conductive material in between the wires and the circuit board.
  • Q. Why can't I use some of the higher-end cards in the LC16M?
    A: Due to the center-mounting optical drive design, the space for longer graphics cards are limited to approximately 225mm assuming the optical drive used is 160mm long. The following are the length of the various cards for reference:

    AMD Radeon HD 4870/4850 = 235mm

    NVIDIA GeForce 9800GT/9600GT/GTO = 230mm

    NVIDIA GeForce 9500GT = 175mm

    AMD Radeon HD 4670/4650 = 170mm

  • Q. Does included VFD/IR work with Microsoft's Windows MCE (Media Center Edition)?
    A: The VFD/IR and remote control in the LC16M will work automatically with Windows MCE after the included software & driver (on a CD) is installed. Microsoft's Media Center remote control and keyboard are also compatible with CL16M's built-in VFD/IR module after software is installed.
  • Q. I cannot get the VFD to work
    A: Please check the following:
    - update to the latest iMON driver at http://www.silverstone-usa.com/software/
    - make sure your VFD is getting power by checking to see if the 4pin floppy power cable is properly connected to the ATX powerup adapter
    - try connecting the USB cable from the VFD into another available USB pin header or port(if you are using USB add-on card, please connect directly to your motherboard¡¦s USB port instead)
    - try disconnecting the power cord from your system for about half an hour and restart again
    If you are still unable to get the VFD to work, please remove the VFD panel from the case and try again. If this works, please reinsert the VFD panel back into the case carefully by adding a non-conductive washer or material to prevent the VFD from shorting against the case. If the error persists, please contact a SilverStone branch office closest to you for assistance in replacing your VFD panel.
  • Q. My VFD is showing, Unregistered RC signal
    A: Please check the following:
    http://www.silverstone-usa.com/software/
    - you maybe using a button that is not yet been programmed to work, please enter the remote setup menu and add a function to the button you wish to use
    - press on the remote button you wish to use repeatedly to assist IR in learning the signal from the remote control
    If you are still getting the "Unregistered RC signal," please remove the IR panel from the case and try again. If this works, please reinsert the IR panel back into the case carefully by adding a non-conductive washer or material to prevent the IR from shorting against the case. If the error persists, please contact a SilverStone branch office closest to you for assistance in replacing your IR panel.
  • Q. I cannot power up my system with the remote control
    A:

    Please make sure you have connected the ATX powerup adapter properly to both the VFD's 4pin floppy power cable and to your power supply.


    (4pin floppy power cable connected to ATX powerup adapter)

  • Q. My hotkeys are not working.
    A:

    - Make sure the connection from your hotkeys to your motherboard USB pins is correct (please refer to your motherboard manual).
    - You should check in your motherboard BIOS that all USB ports are enabled.
    - Check to see all USB ports are working correctly in Window's device manager (there should be no question marks next to any listed USB devices).
    - Try connecting the hotkeys connector to other USB pin headers available on the motherboard.
    - You must be running in Windows Me, 2000, or XP
    - The buttons will work only with software players that have the same keyboard actuated function as windows media player.

    - If you already have hotkeys on other devices (such as ones on multimedia or wireless keyboards), you may need to turn off or disable their software. Using Microsoft Wireless Desktop Elite keyboard as an example, you need to disable "Program Files\Microsoft IntelliPoint\point32.exe" and "Program Files\Microsoft IntelliType Pro\type32.exe". However doing this will also disable the hotkeys on the keyboard.

    - Try dismounting the hotkey module and use washers between the screw mounting points for the module.
  • Q. Do you have a driver for the integrated cardreader, and is the cardreader compatible with 64-bit Operating System.(LC16MR)
    A: Both Windows XP and Vista 64-bit will recognize the card reader automatically and self-install driver for it.
  • Q. The iMON device disconnection problem with game controller.
    A: Please refer to the PDF file.
  • Q. How do I connect the front I/O and card reader cables?
    A: Please download the "I/O connector guide" for reference.


If the answers don't solve your problem, please email to support.eu@silverstonetek.de. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2013 SilverStone Technology Co., Ltd. All Rights Reserved.