ST1000-P
  • 40℃操作温度可24小时连续输出1000W
  • 具备1100W高峰输出能力
  • 100%模块化线材
  • 在20%至100%负载时效能转换率可达85%~88% 并具备80 PLUS 银牌认证
  • 领先等级单组+12V 80 安培输出(高峰值可达85安培)
  • 电压波动在正负3%电压规范内
  • 135mm静音风扇(噪音最小值19dBA)
  • 日系电容
  • 支援两组EPS 8pin
  • 支援四组PCI-E 8pin 六组PCI-E 6pin
  • 支援ATX 12V2.3 与 EPS 12V
  • 主动式PFC
颜色


Designed for 80 PLUS silver level of efficiency to reduce wasted heat and save on electricity.


100% moudlar cable design for use with short cable kit such as SilverStone’s PP05 or for easy removal in a case with cable routed and tied down.


160mm depth sets new standard for high wattage PSUs with modular cables.


Powerful single +12V rail design, perfect for future high-end component upgrades or overclocking.


±3% regulation and low ripple & noise perfomance for high stability.


Built-in 135mm fan has excellent airflow and low noise, perfect for quiet home or office use.

To reduce electrical whine/buzz associated with high performance graphics card’s dynamic loading changes, 2200uF capacitors are attached to PCI-E connectors.
This design also helps to maintain better voltage stability and improve ripple & noise performance.
 

产品规格
型号
SST-ST1000-P
最大DC供电
1000W(峰值1100W)
功率密度
每公升431W
颜色
黑(无铅烤漆)
总+3.3V & +5V 输出
180W
负载范围
输出+3.3V+5V+12V+5VSB-12V
最大电流 (安培数)30A30A80A3.5A0.3A
瞬间最大电流 (安培数)//85A//
最小电流 (安培数)0A0.5A0.1A0.1A0A
电压误差 (%)±3%±3%±3%±5%±10%
电压稳定度 (%)±1%±1%±1%±1%±1%
电压噪声 (mVp-p)50mV50mV120mV50mV120mV
总+12V输出
960W/80A(Peak 85A)
输入电压
90V~264V
输入频率
47Hz ~ 63Hz
主动式功率校正
主动式 PFC(全载时PF>0.95)
效率
20%~100% 负载时可达85%~88%
平均故障间隔
100,000小时(25℃ 全载)
操作温度
0°C ~ 40°C
保护系统
过电流保护

过负载保护

过电压保护

低电压保护

过温度保护

短路保护

无负载保护
接头
1 x 24 / 20-Pin 主机板接头(550mm)

1 x 8 / 4-Pin EPS / ATX 12V 接头(750mm)

1 x 8 / 4-Pin EPS / ATX 12V 接头(550mm)

4 x 8/6-Pin PCIE 接头(550mm)

2 x 6-Pin PCIE 接头(550mm / 150mm)

6 x SATA 接头 (500mm / 250mm / 250mm)

6 x 4-Pin Peripheral 接头(500mm / 250mm / 250mm)

2 x 4-Pin 软盘机接头(500mm / 250mm / 250mm / 150mm)
冷却系统
135mm 静音风扇
尺寸规格
ATX PS/2
噪音
19dBA-36dBA
尺寸
150 mm(宽)× 86 mm(高)× 160 mm(深)
重量
3 kg
认证
80 PLUS Silver
其它
GPU Support list
Compatible with ATX12V v2.4
● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.
档案下载
ST1000-P 高分辨率照片
ST1000-P Product Sheet (CN-Strider-PLUS.pdf)
档案大小
430.96 KB
Multilanguage installation manual
版本
V1.0
档案大小
21.56 MB
保固信息