TJ10

■ 与Extended ATX, ATX, SSI主机板兼容

■ 采用超安静超性能12公分风扇

■ 多选择散热规划

■ 先进的结构设计

■ 人性化及多元化设计

■ 免工具安装

■ 经典SilverStone风格

备注

TJ10 outfitted with AMD QuadFX platform and 12" long Leadtek Quadro FX 5600 1.5GB GDDR3 in SLI

   

TJ10 outfitted with AMD FX platform and 12" long Diamond Radeon HD 2900XTX 1GB GDDR4 (OEM version) in CrossFire

Graphic card length reference:

  NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"

 

規格

型号 SST-TJ10B (黑), SST-TJ10B-USB3.0 (黑)
SST-TJ10S (银)
SST-TJ10B-W(黑,透明侧窗), SST-TJ10B-W-USB3.0(黑,透明侧窗)
SST-TJ10S-W(银,透明侧窗)
材质 前铝面板门组, 2.0mm 铝合金架构
主机板 SSI-EEB, Extended ATX, ATX, Micro-ATX
磁盘架 外露 5.25” x 4
3.5” x 1
隐蔵 3.5” x 6
散热系统 1 x 120mm 风扇孔
1 x 120mm 风扇(出风), 1200rpm, 21dBA
侧边 1 x 120mm中段风扇(进风), 1200rpm, 21dBA
顶部 2 x 120mm 风扇孔
底部 --
内部 --
水冷排支援 前方 N/A
背部 120mm x 1
上方 120mm x 2 (require RADSUPPORT09)
底部 N/A
扩展槽 7
前置 I/O USB 2.0 x 2 (SST-TJ10B, SST-TJ10S, SST-TJ10B-W, SST-TJ10S-W only)
USB 3.0 x 2 (SST-TJ10B-USB3.0, SST-TJ10B-W-USB3.0 only)
IEEE1394 x 1
audio x 1
MIC x 1
电源 1 x 标准PS2(ATX)选配 或1 x Redundant PS2
扩充卡 可相容于12" 长扩充卡 (304mm), 宽度-6.81" (172mm)
处理器散热器限高 169mm
电源供应器深度限制 Unlimited
净重 13 kg
尺寸 207 mm (宽) x 521 mm (高) x 644 mm (深), 69.5 公升
其它 TJ10 NVIDIA Edition

备注
  To build your water cooling system, we recommend equip your TJ10 with RADSUPPORT09 to install a 120x2 radiator in TJ10.
 

 




  • 文件下载
  • 推荐产品
  • 产品评测
  • 问与答


描述 版本 大小 下载
TJ10 manual v1.0 4,442 KB

FP35 Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. 更多...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 更多...
FN121-BL Equip your TJ10 with FN121-BL for added lighting effect in available 120mm fan slots. 更多...
FQ122 120mm ultra-quiet PWM fan 更多...
AR07 高效静音热导管直触CPU散热器 更多...
FS303 5.25吋x 2 转3.5吋x 3热插拔SAS/SATA 6 Gbit/s免托盘内接硬盘抽取盒 更多...
FS305-12G 5.25吋x 3 转3.5吋x 5热插拔SAS 12G / SATA 6Gbit/s免托盘内接硬盘抽取盒 更多...
NT06-PRO CPU cooler designed for SFF. 更多...
ST1200-PT 效率、输出与质量的完美平衡 更多...
推荐之系统或准系统


Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. 将TJ10后方三颗螺丝拆除后,将左侧板小心卸除.
     

2. 使用内六角板手将固定front I/O模块的四颗螺丝卸除,然后将模块小心卸离上盖.
     


   早期版本的TJ10,请由机壳内侧将固定front I/O模块的四颗螺丝卸除,然后将模块小心卸离。
     

3. 将front I/O模块后方的两颗螺丝卸除.
     

4. 将front I/O模块左右两边共两颗螺丝卸除.
     

5. 卸除固定USB模块的四颗螺丝,然后将旧模块小心地卸除.
     

6. 安装新的USB 3.0 模块(零件料号: G11303500),并将四颗固定螺丝小心地锁上.
     

7. 安装新的front I/O铝上盖(零件料号: 银色: G10106112 / 黑色: G10106122),然后将左右共两颗螺丝小心地锁上。
     再依相反的步骤,将机壳小心地装回. 您的机壳现在已经升级至USB 3.0.
     

1. 将TJ09后方三颗螺丝拆除后,将左侧板小心卸除.
     

2. 使用内六角板手将固定front I/O模块的四颗螺丝卸除,然后将模块小心卸离上盖.
      

   早期版本的TJ09,请由机壳内侧将固定front I/O模块的四颗螺丝卸除,然后将模块小心卸离。
     

3. 将front I/O模块后方的两颗螺丝卸除.
     

4. 将front I/O模块左右两边共两颗螺丝卸除.
     

5. 卸除固定USB模块的四颗螺丝,然后将旧模块小心地卸除.
     

6. 安装新的USB 3.0 模块(零件料号: G11303500),并将四颗固定螺丝小心地锁上.
     

7. 安装新的front I/O铝上盖(零件料号: 银色: G10106112 / 黑色: G10106122),然后将左右共两颗螺丝小心地锁上。再依相反的步骤,将机壳小心地装回.
     您的机壳现在已经升级至USB 3.0.