FP35

■ 支持任何3.5寸外露装置槽

■ 支持全系列SDHC卡

■ 附加USB, Firewire, eSATA, HD audio (Azalia) 端口

■ 支持USB 2.0 (480Mbits) 最大传输速率

■ +12V/+5V DC电源线可支持无AC电源转换器的3.5寸外接储存装置

备注

电源线内附于包装内,可支持+12V 6.4mm 规格, 迷你 6Din 与 迷你 4Din 规格。

規格

型号 SST-FP35B
外壳材质 SECC
颜色 黑色, 附银色面板
尺寸 (手把) 101.6mm (宽) x 25.4mm (高) x 140mm (深)
前置 I/O 1 x USB, 1 x 1394, 1 x audio (Azalia), 1 x MIC (Azalia) , 1 x eSATA, 1 x +12V/+5V pass through output
界面 USB 2.0 (480Mbps)
记忆卡电量需求 USB供电
记忆卡支持 XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*)
操作系统支持 Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
重量 390 g
备注 :
  *Windows 98/me requires driver installation(downloadable from download section)
  • 推荐产品
  • 产品评测
  • 文件下载
  • 问与答
CW03
Premium standard ATX HTPC chassis 更多...
TJ10
Flagship-level extended ATX tower chassis 更多...


描述
版本
大小
下载
FP35 Manual v1.0 2,111 KB
Driver for Windows 98/me v1.0 2,625 KB
FP35 高分辨率照片 332 KB
FP35 eDM (CN-FP35B-100dpi.jpg)   347 KB

Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.
  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.