Dispositivos de bahía     FP35



■ Apoya con cualquier bahía de disqueteros 3.5" externa

■ Apoyo completo de tarjeta SDHC

■ USB, Firewire, eSATA, Puertos del audio HD (Azalia) adicionales

■ Apoya USB 2.0 (480Mbits) para la máxima transferencia de datos

■ +12V/+5V DC pasa por salida 3.5 " para el almacenaje externo sin el adaptador AC*

         SilverStone FP35 es un dispositivo de bahía de disqueteros 3.5" finamente hecho a mano que combina un lector de tarjetas de gran alcance y un sistema de USB/1394/eSATA/puertos de audio en uno. Con el apoyo para el formato de tarjeta de medios de SDHC, es el accesorio perfecto para los entusiastas serios de multimedia. La energía DC a través del cable es diseñado para el almacenaje externo 3.5 " usando sin el adaptador de AC cuyo trae más conveniencia para los usuarios.


Recordatorio
* El cable de alimentación se incluye en la caja y apoya con el tipo de +12V 6.4mm, mini 6Din y el tipo mini 4Din.
 
 
 


Modelo No. SST-FP35B
Material de la caja SECC
Color Negro con el panel delantero de plata extra
Medidas(solo de las asas) 101.6mm (ancho) x 25.4mm (alto) x 140mm (largo)
Puertos frontales de entrada/salida 1 x USB, 1 x 1394, 1 x audio (Azalia), 1 x MIC (Azalia) , 1 x eSATA, 1 x +12V/+5V pass through output
Interfaz USB 2.0 (480Mbps)
Requisitos de energía de la tarjeta media USB accionado
Requisitos de energía de la tarjeta media XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*)
Sistemas operativos Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
peso 390 g
Recordatorio :
  *Windows 98/me requires driver installation(downloadable from download section)
CW03
Premium standard ATX HTPC chassis Más...
TJ10
Flagship-level extended ATX tower chassis Más...
 
 
Describe
Ver
Size
Descarga
FP35 Manual
 v1.0 
2,111 KB
     
Driver for Windows 98/me
 v1.0 
2,625 KB
     
FP35 High resolution photos
  
332 KB
     


FP35 eDM (ES-FP35B-100dpi.jpg)
 
370 KB

A:Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.

  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.

A:

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

A:

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.