FP35

■ Supporta qualsiasi alloggiamento esterno da 3.5”

■ Supporto per card SDHC

■ Porti USB, Firewire, eSATA, HD audio (Azalia) aggiuntivi

■ Supporta USB 2.0 (480Mbit per Massimo trasferimento dati)

■ Emissione +12V/+5V DC per storeage esterno 3.5” senza adattatore AC *

Osservazioni

Il cavo d’alimentazione è incluso nella confezione e supporta +12V tipo 6.4mm, mini 6Din and mini 4Din.

 

Specifiche

Modello nr. SST-FP35B
Material dell'enclosure SECC
Colore nero con pannello frontale silver
Dimensioni (solo maniglie) 101.6mm (L) x 25.4mm (A) x 140mm (S)
Porte frontali d'entrata/uscita 1 x USB, 1 x 1394, 1 x audio (Azalia), 1 x MIC (Azalia) , 1 x eSATA, 1 x +12V/+5V pass through output
Interfaccia USB 2.0 (480Mbps)
Requisiti d'alimentazione per media card USB
Supporto media card XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*)
Sistemi operativi supportati Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
Peso 390 g
Osservazioni :
  *Windows 98/me requires driver installation(downloadable from download section)
 
  • Downloads
  • Raccomandazioni
  • Recensioni Sull'articolo
  • Domande e Risposte


Describe
Ver
Taglia
Download
FP35 Manual v1.0 2,111 KB
Driver for Windows 98/me v1.0 2,625 KB
FP35 High resolution photos 332 KB
FP35 eDM (IT-FP35B-100dpi.jpg)   354 KB

CW03
Premium standard ATX HTPC chassis altro...
TJ10
Flagship-level extended ATX tower chassis altro...
Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.
  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.