베이 장치     FP35



■ Fits in any 3.5” external drive bay

■ Full support for SDHC card

■ Additional USB, Firewire, eSATA, HD audio (Azalia) ports

■ Supports USB 2.0 (480Mbits) for maximum data transfer

■ +12V/+5V DC pass through output for 3.5” external storage without AC adapter*

         The FP35 is a finely crafted 3.5” drive bay device that combines a powerful card reader and a set of USB/1394/eSATA/audio ports into one. With support for SDHC media card format, it is the perfect accessory for serious multimedia enthusiasts. The DC power through cable is designed to power 3.5” external storage devices without the need to use AC adapter.


비고
* The power cable is included in the box and support with +12V 6.4mm type, mini 6Din and min 4Din type.
 
 
 


모델 번호 SST-FP35B
Enclosure mterial SECC
Black with extra silver front panel
치수(핸들 바만) 101.6mm (W) x 25.4mm (H) x 140mm (D)
전면 I/O 포트들 1 x USB, 1 x 1394, 1 x audio (Azalia),1 x eSATA, 1 x MIC (Azalia) ,1 x +12V/+5V pass through output
인터페이스 USB 2.0 (480Mbps)
미디어 카드 전원 요구 사항 USB powered
미디어 카드 지원 XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(w/ adapter*) / SD-Ultra II / T-Flash(w/ adapter*) / Micro SD(w/ adapter*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (w/ adapter*)
운영 체제 지원 Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
무게 390 g
비고 :
  *Windows 98/me requires driver installation(downloadable from download section)
CW03
Premium standard ATX HTPC chassis 추가 정보...
TJ10
Flagship-level extended ATX tower chassis 추가 정보...
 
 
설명
Ver
크기
다운로드
FP35 Manual
 v1.0 
2,111 KB
     
Driver for Windows 98/me
 v1.0 
2,625 KB
     
FP35 High resolution photos
  
332 KB
     


FP35 eDM (KR-FP35B-100dpi.jpg)
 
349 KB

A:Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.

  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.

A:

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

A:

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.