FT01

■ 正壓差設計有效提昇散熱效能

■ 延續經典鐵木真TJ07一體成型設計結構之極緻工藝

■ 傑出的人體工學與極富藝術感的低調設計

■ 雙18公分風扇設計提供傑出的散熱效能與靜音效果

■ 鉚接極少化設計易於改裝及擴充

■ 高彈性硬碟儲存功能,可選配SATA熱插拔接頭

備註

For more information about positive air pressure,
please refer to : what is positive air pressure
   
 
  FT01 can support 10.5” consumer level graphics cards.
The support for this type of cards does not require HDD cage to be removed.
    FT01 can support 12” workstation level graphics cards.
To support such long cards, the middle HDD cage must to be removed.
 

Graphic card length reference:
NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5“
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5“
AMD Radeon HD 4870X2 - 10.5 "
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9 "
If an expansion card is longer than 10.5", the middle HDD cage needs to be removed, please refer to the Q&A section for more information.

 

規格

型號 SST-FT01B (黑), SST-FT01B-USB3.0 (黑)
SST-FT01S (銀), SST-FT01S-USB3.0 (銀)
SST-FT01B-W (黑+ 開窗), SST-FT01B-W-USB3.0 (黑+ 開窗)
SST-FT01S-W (銀+ 開窗), SST-FT01S-W-USB3.0 (銀+ 開窗)
材質 3.0mm~6.0mm 一體成形鋁框架與鋁製機身
主機板 ATX, Micro-ATX
磁碟架 外露 5.25" x 5
--
隱藏 3.5" (兼容 2.5”) x 7
冷卻系統 前方 1 x 180mm 進氣風扇, 700rpm, 18dBA
背部 1 x 120mm 排氣風扇, 900rpm, 18dBA
側方 --
上方 1 x 180mm進氣風扇, 700rpm, 18dBA
底部 --
隱藏 --
擴充槽 7
前置 I/O USB 2.0 x 2 (僅SST-FT01B, SSTFT01S, SST-FT01B-W, SST-FT01S-W )
USB 3.0 x 2 (僅SST-FT01B-USB3.0, SSTFT01S-USB3.0, SST-FT01B-W-USB3.0, SST-FT01S-W-USB3.0 )
IEEE1394 x 1
Audio x 1
MIC x 1
電源 可選配標準 PS2(ATX)
顯示卡 可相容12" (304mm) 擴充卡,寬度限制 - 6.85" (173mm)
處理器散熱器限高 170mm
電源供應器深度限制 無限制
淨重 8.66kg
尺寸 211 mm (寬) x 496 mm (高) x 494.5 mm (深), 51.8 公升
其它 內附一組CP05可支援單組SATA硬碟熱插拔功能,並可依需求另添購CP05使用

備註
To enable SATA hot-swap function, you must have the following:

  1. Install SATA hard drive into drive holder with CP05
  2. Use motherboard or SATA card with AHCI function
  3. Enable AHCI function(please refer to your motherboard or SATA card manual)
  4. When installing OS(Windows XP SP2 or Vista), SATA drivers should be pre-loaded


 




  • 下載
  • 推薦產品
  • 產品評論
  • 問與答


描述 版本 大小 下載
FT01 Manual v1.0 2,984 KB
FT01 高解析度照片 14,955 KB

CP05-SAS Convenient hot-swap SAS / SATA 6G connector. 更多...
CP07 SATA III線材內部包覆防電磁波的金屬防護層及180度水平接頭 更多...
FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. 更多...
FP58 5.25” drive bay for slot-loading slim optical drive and four 2.5” drives 更多...
AP182 Equip your SG09 with AP182 for crazy airflow. 更多...
AR07 高效靜音熱導管直觸CPU散熱器 更多...
HE01 Twin tower cooler for maximum cooling performance. 更多...
HE02 The ultimate heatsink with flexibility in nearly all applications. 更多...
Please refer to the FT01 180mm fan removal guide

180mm fan removal purposes:
- Upgrade original 180mm fan or for maintenance and replacement
- To gain access to the fan filter for the top mounted 180mm fan

1.Remove two screws located on the front 180mm fan bracket

2.Remove fan bracket

3.As shown in the photo, mounting holes circled in red are for 180mm fan while ones circled in blue are for 120mm fan

4.Place the case upside-down to facilitate in the removal of the first screw holding the top fan bracket

5.The second screw of the top fan bracket can be removed from behind the motherboard tray

6.The entire fan bracket assembly including the fan filter can now be removed by pulling it toward the front of the case
Please refer to the hard drive bracket removal guide
Hard drive bracket removal is optional for enabling more room for extra long expansion cards or when there are less than four hard drives installed.

From the case’s right side, remove the four screws holding the top hard drive bracket assembly

2. Then pull the top hard drive bracket assembly out from the left side

3. There are four screws for the lower hard drive bracket assembly that can be removed

4. Then pull out all hard drive racks from the lower hard drive bracket

5. With the racks removed, two screws holding the lower hard drive bracket to the bottom of the case can now be accessed and removed as well

6. The lower hard drive bracket can now be pulled out


Currently more advanced motherboards come with either manual or automatic fan control. Under these circumstances, when the CPU temperature is low, the motherboard can lower fan voltage output to slow the connected fans down; thereby lowering the fan noise.
The fans included in the FT01, especially the 180mm fans located on top and the front, are designed for very low noise even at full speed. The 180mm fans are rated at 700rpm maximum and have sound frequency far lower than most fans, making them practically unnoticeable in normal usage. However, due to their increased size and weight, coupled with lower maximum speed, they require higher average voltage to start than smaller fans.
If the 180mm fans in your FT01 are connected to the motherboard fan headers and are having trouble starting or spinning consistently, we recommend turning off or disabling fan voltage control (whether manual or automatic) in the motherboard BIOS options. The FT01’s highly optimized cooling performance may result in the motherboard sensing lower temperature and supplying lower fan voltage through its fan headers.
  1. Please unscrew the screws in the back panel as shown and remove both side panels.


  2. Please unscrews the screws in the side panel and take off the front bracket.


  3. Please unscrew the screws from inside the drive bay as shown.


  4. Finally you can take off the 5.25” plastic drive holder as shown.
Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.



Power Switch 與Reset Switch安裝說明:
請參考主機說明書的Front Panel Connectors安裝Pin Define,將Connector插上; Power Switch 與Reset Switch並無正負極性之分,反插正插都不影響功能性。



LED接頭安裝說明:
請參考主機說明書的Front Panel Connectors安裝Pin Define,將Connector插上;白色線的部分為負極,彩色線的部分是正極。
Power LED為了適應各主機板的不同,特別設計為散Pin樣式,請安心使用。

1. 將左後方三顆螺絲拆除後,小心地將左邊側版卸除.
     

2. 先將機殼倒立, 然後使用適合的螺絲起子卸除固定USB模組的兩顆螺絲,然後將舊模組小心地卸除.
     

3. 安裝新的USB 3.0 模組(零件料號: G11303500),並將兩顆固定螺絲小心地鎖上.
     

4. 請依相反的步驟,將機殼小心地裝回.
     您的機殼現在已經升級至USB 3.0.