■ CPU 냉각을 위한 충분한 공관 확보 (높이 78mm)

■ 메인보드의 배면 콤포넌트를 위해 높이를 올린 Standoff

■ 미니 케이스에서는 유레없는 120mm팬을 탑재해 공기 양압을 이용한 냉각

■ 2.5”와 3.5” 하드 드라이브 지원

■ Mini-DTX / Mini-ITX motherboard & SFX PSU 호환

■ 80Plus 300W 파워를 기본 탑재하고 잇다는 점 등이다.

■ 표준 길이의 확장카드 지원 (10인치)


*Sugo SG05/SG06, the benchmark for the next generation SFF case.
*SilverStone 80 PLUS power supplies.

SG05 support with 9.5" long NVIDIA Geforce 8800GTS 512MB in 1xPCIE 6pin

Graphic card length reference:
  • ATI Radeon HD 5670 - 6.7"
  • ATI Radeon HD 5750 - 8.15"
  • ATI Radeon HD 4850/4830/5770 - 9"
  • ATI Radeon HD 5850 - 9.5"(ST45SF PSU recommended)
  • NVIDIA GeForce GTX 680 - 10"
  • NVIDIA GeForce 9800GT - 9"
  • NVIDIA GeForce 9600GT/GSO - 9"
  • NVIDIA GeForce 8800GS/GT/GTS - 9"
  • NVIDIA GeForce GTS 250 - 9"
  • NVIDIA GeForce GTX 460 - 8.25" (ST45SF PSU recommended)



모델 번호 SST-SG05B (black)
SST-SG05W (white)
SST-SG05B-USB3.0 (black)
SST-SG05W-USB3.0 (white)
재질 Plastic front panel, 0.6mm SECC body
메인보드 Mini-DTX, Mini-ITX
드라이브 베이 외부 Slim optical x 1
내부 3.5” x 1 , 2.5”x 1
냉각 시스템 전면 1 x 120mm intake fan 1200rpm
후면 --
측면 Oversized vents
상단 Oversized vents
하단 --
내부 --
확장 슬롯 2
전면 I/O 포트 USB 3.0 x 2 (SG05B-USB3.0, SG05W-USB3.0 only)
USB 2.0 x 2 (SG05B, SG05W only)
Audio x 1
MIC x 1
전원 공급장치 SFX 300W with 80 PLUS certification (SilverStone tuned)
확장 카드 10" (254mm) 그래픽 카드 지원가능, 폭 제약 - 5.11" (129mm)*
CPU 쿨러의 한계 82mm
순 중량 3.52 kg
치수 222 mm (W) x 176 mm (H) x 276 mm (D), 10.8 리터

*CPU cooler cannot exceed 82mm in height.

Power supply type
최대 DC 출력
+3.3V +5V +12V1 +12V2 +5VSB -12V
20A 22A 14A 16A 2.5A 0.5A
/ / 19A 19A 3A /
0.5A 0.5A 1A 1A 0A 0A
+/-5% +/-5% +/-5% +/-5% +/-5% +/-5%
70mV 70mV 140mV 140mV 70mV 70mV
결합형 +3.3V & +5V
결합형 +12V
22A / 264W
입력 전압
90V ~ 264V(Auto Range)
입력 주파수 범위
47Hz ~ 63Hz
Active PFC (PF>0.95 at full load)
작동 온도
0 ~ 50°C
Over current protection, Over power protection, Over voltage protection, Short circuit.
1 x 24-pin motherboard connector (300mm)
1 x 4-pin ATX12V connector (400mm)
1 x 6-pin PCI-E connector (400mm)
1 x triple SATA connector (300mm +200mm +100mm)
1 x dual 4-pin IDE (300mm + 200mm)
1 x single floppy power connectors
(300mm + 200mm + 200mm)
냉각 시스템
Single 80mm fan
폼 팩터
소음 레벨
19 dBA minimum
125 mm (W) x 63.5 mm (H) x 100 mm (D)
GPU Support list
Compatible with ATX12V v2.4

● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.

Dimensions and cable pinout diagram

  • 다운로드
  • 권장사항
  • 제품 리뷰
  • Q&A

설명 Ver 크기 다운로드
SG05 Multi Manual v1.0 2,502 KB
SG05 Power supply Manual v1.0 106 KB
SG05 eDM (KR-SG05B-EDM-U3.pdf)   714 KB

FPS01 12.7mm 슬림형 광학 베이용 다기능 전면 패널 추가 정보...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 추가 정보...
FQ122 120mm ultra-quiet PWM fan 추가 정보...
AR06 HDC(히트 파이프 직접 접촉) 기술을 채택한 고급 로우 프로필 방열판 추가 정보...
NT06-PRO CPU cooler designed for SFF. 추가 정보...
권장 시스템/베어본 PC
The TFX 300W unit used in the SG05/SG06 was selected and tuned by SilverStone engineers for improved quietness and performance (300W continuous power at 50C). It has dedicated +12V rail for graphics card (16A, peak 19A) to provide more than enough power for any 9" long dual slot graphics cards. We actually do not recommend using off the shelf SFX PSUs at this time as they may not be designed to work well in the SG05/SG06 environment as we have done with the included unit.

As a reference, here is a list of components used in the SG05 development system:
Intel Core 2 Quad 9550 95W CPU
MSI IM-Q35 DO Industrial Mini-ITX motherboard
Corsair TWIN2X2048-6400C5DX DDR2 memory
*AMD Radeon HD4850 graphics card*
WD Raptor 150GB + VelociRaptor 300GB 10,000rpm hard drives
Slim Blu-ray drive
*The Radeon HD4850 was the highest powered card that can fit inside the SG05 at the time of development (more than NVIDIA GTS 250, which is a dual slot design.)

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. Loosen four screws located on the back of SG05.

2. Push top-cover in the direction as shown gently and finally pull up to remove it from the SG05.

3. Loosen two screws located on 3.5” HDD tray and detach it gently.

4. Loosen six screws located near slim optical drive tray and detach it gently.

5. Loosen two screws near front I/O module and detach it gently.

6. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.

7. Assemble parts back in reverse order carefully. Your case is now USB3 ready.