GD05

The TS03 supports slim optical drive to reduce the depth required in the 5.25” optical drive bay. It can increase the space for CPU cooler in the GD05. The limitations of installing NT06-E into the GD05 are as follow：

1. Horizontal orientation of CPU cooler on the motherboard.
   
   
   

   The distance from CPU to motherboard edge.
   55.5mm<x<68mm
   69.5mm<y<89mm

   
   
2. Vertical orientation of CPU cooler on the motherboard.
   
   

The distance from CPU to motherboard edge.
59.5mm<x<96.5mm
98mm<y<117.5mm

The above limitations apply only if graphics card is installed in the first expansion slot and with rear 80mm fans installed.
If fans are removed, y distance decreases by 25mm
If graphics card is installed in the second expansion slot, the x distance increases by 20mm

Installation guide

1. Install the NT06-E on the motherboard.
   
   
   
   
2. Insert a slim optical drive into the TS03.
   
   
   
3. Install the motherboard into the chassis.
   
   
   
   
   
4. Install and secure the TS03 in the 5.25” drive bay.
   
   
   
   
5. Connect the wires and cables to the TS03.
   
   
   
   
6. Install a 120mm fan over the NT06-E as needed.
   

1. 将GD05后方三颗螺丝拆除并小心地将上盖卸除.
     

2. 将硬盘架四颗螺丝卸下后小心地卸除.
     

3. 卸除固定USB模块的两颗螺丝，然后将旧模块小心地卸除.
     

4. 安装新的USB 3.0 模块（零件料号: G11303260），并将两颗固定螺丝小心地锁上.
     

5. 请依相反的步骤，将机壳小心地装回. 您的机壳现在已经升级至USB 3.0.