FT02

■ 承袭RAVEN RV01将主机板旋转90度的优异散热设计

■ 全铝4.5mm一体成形优雅架构

■ 3颗180mm置底风扇阵列,平行气流搭配烟囱效应,达成压倒性的散热效率

■ 支援水冷系统

■ CPU区块后方预留窗孔以方便安装散热器

■ 支援11吋宽ATX主机板

■ 内部含吸音棉,更有效达到静音效果

备注


ATI Radeon HD 5970 in FT02

 

規格

型号 SST-FT02B (黑), SST-FT02B-USB3.0 (黑)
SST-FT02S (银), SST-FT02S-USB3.0 (银)
SST-FT02B-W (黑+ 侧窗), SST-FT02B-W-USB3.0 (黑+ 侧窗)
SST-FT02S-W (银+ 侧窗), SST-FT02S-W-USB3.0 (银+ 侧窗)
材质 4.5mm一体成形铝框架与0.8mm钢制机身
主机板 SSI-CEB, ATX (最大支持 12” x 11”), Micro-ATX
磁盘架 外露 5.25" x 5
--
隐蔵 3.5"/2.5" x 5 , 2.5” x1
散热系统 --
--
侧边 --
顶部 1 x 120mm 出风风扇, 1200rpm, 19dBA
底部 3 x 180mm 进风风扇, 700/1200rpm, 18/34dBA
内部 --
水冷排支援 前方 N/A
背部 N/A
上方 120mm x 1
底部 120mm x 3
扩展槽 7
前置 I/O USB 2.0 x 2 (SST-FT02B, SST-FT02S, SST-FT02B-W, SST-FT02S-W only)
USB 3.0 x 2 (SST-FT02B-USB3.0, SST-FT02S-USB3.0, SST-FT02B-W-USB3.0, SST-FT02S-W-USB3.0 only)
Audio x 1
MIC x 1
电源 可选配标准 PS2(ATX) 电源供应器
显示卡 可相容于12" (304mm) 或12.2" (309mm)(移除风扇护网), 宽度-6.69" (169mm)
处理器散热器限高 165mm
电源供应器深度限制 Unlimited
净重 15.3kg (FT02B,FT02S)
15kg (FT02B-W, FT02S-W)
尺寸 212mm (W) x 497mm (H) x 616mm (D), 64.9 公升
其它 内附一组CP05可支持eSATA 热插拔功能,并可依需求购买另外的CP05使用

 




  • 文件下载
  • 推荐产品
  • 产品评测
  • 问与答


描述 版本 大小 下载
FT02 Manual v1.0 7,146 KB
FT02 高分辨率照片 60,225 KB
FT02 eDM (CN-FT02-EDM-USB3.0.pdf)   641 KB

CP05-SAS Convenient hot-swap SAS / SATA 6G connector. 更多...
CP07 SATA III线材内部包覆防电磁波的金属防护层及180度水平接头 更多...
FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. 更多...
FP58 5.25” drive bay for slot-loading slim optical drive and four 2.5” drives 更多...
AP182 Equip your SG09 with AP182 for crazy airflow. 更多...
AR07 高效静音热导管直触CPU散热器 更多...
HE01 Twin tower cooler for maximum cooling performance. 更多...
HE02 The ultimate heatsink with flexibility in nearly all applications. 更多...
There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:

Motherboard:

The orientation of an enthusiast motherboard in a normal ATX case


The orientation of an enthusiast motherboard in the FT02

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the FT02, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler


Good orientation Good orientation Bad orientation


Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler


The illustration here shows a VGA cooler that will not work well in the FT02 because the heat source side (touching the GPU) ends up being located higher than the other end.

RV02B-W v1.7 and after
FT02B v1.4 and after
FT02S v1.4 and after
FT02B-W v1.7 and after

1. 请使用双手将上盖往上小心地卸除.
     

2. 请先将机壳上前盖的两颗螺丝拆除,然后依图示将上前盖往前小心的移动再往上拉,将上前盖卸除.
     

3. 将上前盖反过来卸除固定USB模块的两颗螺丝,然后将旧模块小心地卸除.
     

4. 安装新的USB 3.0 模块(零件料号: G11303260),并将两颗固定螺丝小心地锁上.
     

5. 安装新的USB 3.0 模块,并将两颗固定螺丝小心地锁上.
    您的机壳现在已经升级至USB 3.0.