AP181
￭ Ventilador canalizador de aire pionero en su campo
￭ Aspas de ventilador anchas para reducir la resistencia del aire
￭ Rejilla canalizadora de aire integrada que sirve como protección para el ventilador y así consigue reducir el tamaño total
￭ Bajo consumo eléctrico
Recordatorio
*Air Penetrator design explained
*Air Penetrator fan demonstration video:
Especificaciones
| Modelo No. | SST-AP181 |
| Color | Black |
| Rodamientos | Sleeve |
| Conectores | 3pin |
| Voltaje clasificado | 12V DC |
| Voltaje inicial | ≦0,9V DC (in low rpm mode) |
| Curriente clasificada | 0,45AMP |
| Potencia clasificada | 5.4W |
| Velocidad | 600 ; 900 ; 1200 rpm |
| Flujo de aire | 52,4 / 78,68 / 100,27 CFM |
| Alcance efectivo del flujo de aire | 1.2 ; 3 Meter |
| Presión estática | Max 0,49 / 1,12 / 2,18 mmH2O |
| Velocidad del aire | 1.5m/s ; 2.4m/s ; 3.1m/s (measured at fan exit) |
| Nivel sonoro | 15,9 / 24,75 / 30 dB(A) |
| Vida media | 16,000 horas |
| Medidas | 180mm (L) x 180mm (W) x 32mm (H) |
| Peso | 441.35g |
|
PICTURES
- Descargas
- Recomendaciones
- Reseña del producto
- P y R
| Describe | Ver | tamaño | Descarga |
 AP181 High resolution photos |
1,041 KB |  |
|
1. I feel the AP181 is still not quiet enough at default low speed setting, can I use a fan controller or other methods to lower fan speed further?
AP181 uses industry standard 3pin fan connector, so it will work with most fan controllers, motherboards, and other devices that use voltage regulation to control fan speed.
The starting voltage for AP181 at low speed setting requires about 10.8V, which some fan controllers may not support properly. So when connecting to fan controller, it is best to flip the case’s fan speed switch to high setting to enable lower starting voltage. At 5V for example, the fan speed will be at around 500rpm, which is nearly inaudible.
When connecting to motherboard for fan speed control, if AP181 appears to have trouble starting, it may be due to motherboard detecting low temperature and supply too little voltage. To solve this problem, please change the motherboard fan speed or temperature setting from within the motherboard BIOS or flip the case’s fan speed switch to high setting.
The starting voltage for AP181 at low speed setting requires about 10.8V, which some fan controllers may not support properly. So when connecting to fan controller, it is best to flip the case’s fan speed switch to high setting to enable lower starting voltage. At 5V for example, the fan speed will be at around 500rpm, which is nearly inaudible.
When connecting to motherboard for fan speed control, if AP181 appears to have trouble starting, it may be due to motherboard detecting low temperature and supply too little voltage. To solve this problem, please change the motherboard fan speed or temperature setting from within the motherboard BIOS or flip the case’s fan speed switch to high setting.