AP181
￭ 業界をリードするエアチャンネルファン
￭ 空気抵抗を減らす幅広ブレード
￭ ファンガードの倍の内蔵エアチャンネルグリルでコンパクトサイズ
￭ 低消費電力
備考
*Air Penetrator design explained
*Air Penetrator fan demonstration video:
製品仕樣
| 型番 | SST-AP181 |
| カラー | Black |
| ベアリング形式 | Sleeve |
| コネクタ | 3pin |
| 定格電圧 | 12V DC |
| 始動電圧 | 10.8V DC (in low rpm mode) |
| 定格電流 | 0.45AMP |
| 定格電力 | 5.4W |
| 回転数 | 600 ; 900 ; 1200 rpm |
| 流量 | 52.4 / 78.68 / 100.27 CFM |
| 有効エアフロー範囲 | 1.2 ; 3 Meter |
| 静圧 | Max 0.49 / 1.12 / 2.18 mmH2O |
| エア スピード | 1.5m/s ; 2.4m/s ; 3.1m/s (measured at fan exit) |
| ノイズレベル | 15.9 / 24.75 / 30 dB(A) |
| 製品寿命 | 16,000 時間 |
| 寸法 | 180mm (L) x 180mm (W) x 32mm (H) |
| 重量 | 441.35g |
|
PICTURES
- ダウンロード
- おすすめ製品
- 製品 レビユー
- Q&A
| Describe | Ver | サイズ | ダウンロード |
 AP181 High resolution photos |
1,041 KB |  |
|
|
1. I feel the AP181 is still not quiet enough at default low speed setting, can I use a fan controller or other methods to lower fan speed further?
AP181 uses industry standard 3pin fan connector, so it will work with most fan controllers, motherboards, and other devices that use voltage regulation to control fan speed.
The starting voltage for AP181 at low speed setting requires about 10.8V, which some fan controllers may not support properly. So when connecting to fan controller, it is best to flip the case’s fan speed switch to high setting to enable lower starting voltage. At 5V for example, the fan speed will be at around 500rpm, which is nearly inaudible.
When connecting to motherboard for fan speed control, if AP181 appears to have trouble starting, it may be due to motherboard detecting low temperature and supply too little voltage. To solve this problem, please change the motherboard fan speed or temperature setting from within the motherboard BIOS or flip the case’s fan speed switch to high setting.
The starting voltage for AP181 at low speed setting requires about 10.8V, which some fan controllers may not support properly. So when connecting to fan controller, it is best to flip the case’s fan speed switch to high setting to enable lower starting voltage. At 5V for example, the fan speed will be at around 500rpm, which is nearly inaudible.
When connecting to motherboard for fan speed control, if AP181 appears to have trouble starting, it may be due to motherboard detecting low temperature and supply too little voltage. To solve this problem, please change the motherboard fan speed or temperature setting from within the motherboard BIOS or flip the case’s fan speed switch to high setting.