SG07

■ Chasis SFF de primera clase con ventilador de 180mm y refrigeración con presión positiva

■ Amplio espacio para el refrigerador del micro (117mm de altura)

■ Base elevada para los componentes laterales de la placa base

■ Acepta hasta dos SSD/discos duros de 2,5” y un disco duro de 3,5”

■ Incluye fuente de alimentación certificada 80 PLUS Bronce de 600V@50℃ y raíl único de +12V

■ Conducto VGA ajustable para una mayor eficiencia de la refrigeración

■ Filtros de los ventiladores desmontables incluidos para los ventiladores de carcasa, FA y conducto VGA

■ Acepta tarjetas gráficas de hasta 12,2 pulgadas y 400V

Recordatorio

AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 6990 – 12"
AMD Radeon HD 6970 – 11"
AMD Radeon HD 6950 – 11"
NVIDIA GeForce GTX690 – 11"
AMD Radeon HD 6870 – 10.5"
NVIDIA GeForce GTX580 – 10.5"
NVIDIA GeForce GTX680 – 10"
NVIDIA GeForce GTX670 – 9.5"
AMD Radeon HD 6850 – 9"

 

Especificaciones

Modelo No. SST-SG07B(negro)
SST-SG07B-W(negro+ ventan)
SST-SG07B-USB3.0(negro)
SST-SG07B-W-USB3.0(negro+ ventan)
Material Panel frontal de rejilla y cuerpo de acero
Placa Madre Mini-DTX, Mini-ITX
Bahías Externas 1 x Óptico delgado
--
Internas 3.5” x 1 , 2.5”x 2
Refrigeración Frente --
Parte posterior --
Lado Conducto VGA ajustable
Tapa 1 x 180mm ventilador de entrada, 700/1200rpm, 18/34dBA
Parte inferior 1 x 120mm zócalo para ventilador
Interno --
Slots de Expansión 2
Puertos USB 2.0 x 2 (SST-SG07B, SST-SG07B-W only)
USB 3.0 x 2 (SST-SG07B-USB3.0, SST-SG07B-W-USB3.0 only)
Audio x 1
MIC x 1
Fuente de Alimentación Incluye fuente de alimentación certificada 80 PLUS Bronce de 600V, raíl único de +12V
Gráficos Tarjeta Acepta tarjetas gráficas de 12,2" (309mm), restricción de anchura – 4,38" (111mm)
Limitación del disipador de la CPU 117mm
Limitación de Fuente de alimentación 140mm (remove VGA Card if you want install up to 170mm)
Peso 4.9kg (SG07B)
5kg (SG07B-W)
Dimensiones 222 mm (Ancho) x 190 mm (Alto) x 350 mm (Profundo), 14.8 litros

Recordatorio
AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 5870 – 11"
NVIDIA GeForce GTX480 – 10.5"
AMD Radeon HD 5850 – 9.5"
NVIDIA GeForce GTX470 – 9.5"


Model No.
SST-ST60F-SG
Max. salida DC
600W
Color
Negro (pintura sin plomo)
Rango de carga
 
+3.3V +5V +12V +5VSB -12V
Max. (amperio)
25A 25A 46A 3.0A 0.8A
Min. (amperio)
0.8A 0.5A 4A 0.1A 0A
Rango (%)
+/-5% +/-5% +/-5% +/-5% +/-10%
Ripple(mVp-p)
50mV 50mV 120mV 50mV 120mV
Combinado +3.3V & +5V
140W
Combinado+12V
46A / 552W
Voltaje de entrada
90V ~ 265V(Auto Range)
Rango de voltaje de entrada
47Hz ~ 63Hz
PFC
Active PFC (PF>0.95 at full load)
Eficiencia
82%~85% al 20%~100% de carga
MTFB
100.000 horas a 25°C, plena carga
Temperatura operativa
10°C ~ 50°C
Protecciones
Protección por exceso de corriente
Protección por exceso de potencia
Protección por exceso de voltaje
Protección por poco voltaje
Protección por cortocircuitos
Conectores
1 x 24 / 20-Pines conector de placa base(670mm)
1 x 8 / 4-Pines conector EPS / ATX 12V(670mm)
1x 8/6-Pines conector PCIE(360mm)
1x 8/6-Pines conector PCIE(380mm)
3 x conector SATA (350mm / 130mm / 150mm)
2 x 4- Pines conector para periféricos(350mm / 130mm / 150mm)
Sistema de refrigeración
Ventilador de 120mm
Formato
Nivel sonoro
19 dBA - 30dBA
Medidas
150 mm (Ancho) x 86 mm (Alto) x 140 mm (Profundo)
Peso
940grs
Certification
80 PLUS Bronze
Varias
GPU Support list
Compatible with ATX12V v2.4
● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.

 




  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R


Describe Ver tamaño Descarga
SG07 Manual v1.0 3,151 KB
SG07 High resolution photos 7,819 KB
SG07 eDM (ES-SG07-EDM.pdf)   506 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector Más...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. Más...
AP181 Equip your chassis with AP181 as the intake fan for extreme cooling performance. Más...
AP183 Ventilador canalizador de aire de 180mm con PWM y rodamientos duales Más...
AR06 Avanzado radiador de perfil bajo con tecnología de tubos isotérmicos de contacto directo (HDC) Más...
NT06-PRO CPU cooler designed for SFF. Más...
SOD03 Dispositivo óptico SATA CD/DVD-RW 8X de 9,5mm con carga mediante ranura Más...
TOB03 Grabador de Blu-ray 6x delgado de 9,5mm con carga mediante bandeja Más...
Recommended motherboard
  • If GTX 480 is installed into the SG07 directly, the fan will not install correctly because the GTX 480’s heat pipes will interfere with the brace holding the fan.





  • Overlooking the case from the top, the heat pipes do not make contact with the frame so there is enough space to install GTX 480 in the SG07.




  • By removing the brace from the fan, the GTX 480 can be installed with the fan frame touching the heat pipes slightly.




The SG07 is a Mini-ITX case with unprecedented cooling capability. To fully take advantage of this, users can purchase larger aftermarket CPU cooler.

We firstly recommend getting motherboards such as DFI’s LANParty MI P55-T36 for use in the SG07. Its CPU socket location enables it to accommodate various aftermarket coolers including some tower style ones.


If you need to use H55 based Mini-ITX boards such as Zotac’s H55-ITX WiFi that has CPU socket very close to the PCI-E slot, then the CPU cooler choices will be more limited.


We have tested several aftermarket CPU coolers and found that the Thermalright AXP-140 to be compatible with H55 based Mini-ITX motherboard. Please refer to the following photos for example of a build with this CPU cooler and motherboard combination:

(Special note: The 120mm fan installed on top of the CPU cooler is for reference only, it is not required for safe operation as SG07’s included AP181 on top of the case can provide enough cooling to support CPU up to 95W power level.)
There is a power switch located directly on SG07's power supply and it maybe in the "off" position. The switch is located next to the power cord connector on the power supply, please check it and make sure it is in the "on" position.

1. Loosen three screws located on the back of SG07.
     

2. Push top-cover in the direction as shown gently and finally pull up to detach the top-cover
     

3. Loosen four screws located on optical drive bracket and detach it gently.
     

4. Loosen two screws located on hard drive bracket and detach it gently.
     

5. Unplug power cord.
     

6. Loosen two screws near front I/O module and detach it gently.
     

7. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
     

8. Assemble parts back in reverse order carefully.
     Your case is now USB3 ready.