■ Diseño con superficie súper mini sin cables y con aberturas en los cuatro lados

■ Amplio espacio para refrigerador de CPU (78mm de altura)

■ Base elevada para componentes laterales en placa base

■ Incluye ventilador Air Penetrator de 140mm y acepta refrigeración líquida básica

■ Acepta dos discos duros/SSD de 2,5” y un disco duro de 3,5”

■ Compatible con placas base Mini-DTX/Mini-ITX y FA SFX

■ Acepta tarjetas de expansión de longitud estándar (10 pulgadas)


Graphic card length reference:
ATI Radeon HD 4850/4830 - 9”
NVIDIA GeForce 9800GT - 9"
NVIDIA GeForce 9600GT/GSO - 9"
NVIDIA GeForce 8800GS/GT/GTS - 9"
NVIDIA GeForce GTX 680 - 10"



Modelo No. SST-FT03B-MINI (Negro)
SST-FT03S-MINI (Plata)
Material Carcasa exterior de aluminio, cuerpo de acero, cuerpo de acero
Placa Madre Mini-DTX, Mini-ITX
Bahías Externas 12.7mm Óptico delgado x 1
Internas 3.5” x 1 , 2.5”x2
Refrigeración Frente --
Parte posterior --
Lado --
Tapa --
Parte inferior 1 x 140mm Air Penetrator fan, 1500rpm
Interno --
Slots de Expansión 2
Puertos USB 3.0 x 2
Audio x 1
MIC x 1
Fuente de Alimentación 1 x Optional standard SFX
Gráficos Tarjeta Acepta tarjetas gráficas de 10" (254mm), restricción de anchura – 5,11" (129mm)
Limitación del disipador de la CPU 82mm
Limitación de Fuente de alimentación SFX PSU
Peso 4.7kg
Dimensiones 188.9mm(Ancho)x 397mm(Alto)x235.1mm(Profundo), 17.6 litros


  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R

Describe Ver tamaño Descarga
FT03-MINI manual v1.0 4,576 KB
FT03-MINI High resolution photos 2,120 KB
FT03-MINI eDM (ES-FT03-MINI-EDM.pdf)   293 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector Más...
CLEARCMOS Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. Más...
AR06 Avanzado radiador de perfil bajo con tecnología de tubos isotérmicos de contacto directo (HDC) Más...
NT06-PRO CPU cooler designed for SFF. Más...
ST45SF SFX ST45SF is smaller and has shorter cables to enable additional room inside the case Más...
ST45SF-G SFX PSU with 80 PLUS Gold efficiency and 100% modular cables Más...
SX500-G La referencia para las fuentes de alimentación SFX estándar Más...
SX600-G Una nueva referencia para las SFX form factor Más...
SX650-G La referencia para las fuentes de alimentación SFX estándar Más...
SOD03 Dispositivo óptico SATA CD/DVD-RW 8X de 9,5mm con carga mediante ranura Más...
Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would have the advantage in the FT03-MINI as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully recommend using liquid cooler in the FT03-MINI as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within the FT03-MINI.
There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:


The orientation of an enthusiast motherboard in a normal ATX case

The orientation of an enthusiast motherboard in the FT03-MINI

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the FT03-MINI, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler

Good orientation Good orientation Bad orientation

Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler

The illustration here shows a VGA cooler that will not work well in the FT03-MINI because the heat source side (touching the GPU) ends up being located higher than the other end.