■ 네 측면에 케이블과 통풍구가 없는 수퍼 미니 풋프린트 디자인

■ PU 냉각을 위한 충분한 공관 확보 (높이 82mm)

■ 메인보드의 배면 콤포넌트를 위해 높이를 올린 Standoff

■ 140mm Air Penetrator 팬이 포함되고 엔트리 레벨의 액체 냉각장치를 지원합니다.

■ 2개의 2.5" SSD/하드 드라이브와 1개의 3.5" 하드 드라이브를 지원합니다.

■ Mini-DTX / Mini-ITX motherboard & SFX PSU 호환

■ 표준 길이의 확장카드 지원 (10인치)

Lucid LD03, the modern FT03-MINI successor

Graphic card length reference:
ATI Radeon HD 4850/4830 - 9”
NVIDIA GeForce 9800GT - 9"
NVIDIA GeForce 9600GT/GSO - 9"
NVIDIA GeForce 8800GS/GT/GTS - 9"
NVIDIA GeForce GTX 680 - 10"



모델 번호 SST-FT03B-MINI (black)
SST-FT03S-MINI (silver)
재질 알루미늄 외관, 스틸 몸체
메인보드 Mini-DTX, Mini-ITX
드라이브 베이 외부 12.7mm 슬림 광드라이브 x 1
내부 3.5” x 1 , 2.5”x2
냉각 시스템 전면 --
후면 --
측면 --
상단 --
하단 1 x 140mm Air Penetrator fan, 1500rpm
내부 --
확장 슬롯 2
전면 I/O 포트 USB 3.0 x 2
Audio x 1
MIC x 1
전원 공급장치 1 x표준 SFX 파워 지원
확장 카드 10" (254mm) 그래픽 카드 지원가능, 폭 제약 - 5.11" (129mm)
CPU 쿨러의 한계 82mm
순 중량 4.7kg
치수 188.9mm (W) x 397mm (H) x 235.1mm (D), 17.6 리터


  • 다운로드
  • 권장사항
  • 제품 리뷰
  • Q&A

설명 Ver 크기 다운로드
FT03-MINI manual v1.0 4,576 KB
FT03-MINI High resolution photos 2,120 KB
FT03-MINI eDM (KR-FT03-MINI-EDM.pdf)   347 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector 추가 정보...
AR06 HDC(히트 파이프 직접 접촉) 기술을 채택한 고급 로우 프로필 방열판 추가 정보...
NT06-PRO CPU cooler designed for SFF. 추가 정보...
ST45SF SFX ST45SF is smaller and has shorter cables to enable additional room inside the case 추가 정보...
ST45SF-G SFX PSU with 80 PLUS Gold efficiency and 100% modular cables 추가 정보...
SX500-G 표준 SFX 전원 공급장치 벤치마크 추가 정보...
SX600-G SFX 폼팩터의 새로운 이정표 추가 정보...
SX650-G 표준 SFX 전원 공급장치 벤치마크 추가 정보...
Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would have the advantage in the FT03-MINI as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully recommend using liquid cooler in the FT03-MINI as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within the FT03-MINI.
There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:


The orientation of an enthusiast motherboard in a normal ATX case

The orientation of an enthusiast motherboard in the FT03-MINI

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the FT03-MINI, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler

Good orientation Good orientation Bad orientation

Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler

The illustration here shows a VGA cooler that will not work well in the FT03-MINI because the heat source side (touching the GPU) ends up being located higher than the other end.