SG10

■ Acepta tarjetas gráficas de cualquier longitud

■ Acepta disipadores para CPU gran torre

■ Acepta FAs Strider Plus de hasta 1000W

■ Diseño con enrutamiento de cables

■ Amplios zócalos de ventilador para un flujo de aire máximo

■ Panel delantero de aluminio estilo limpio

 

Especificaciones

Modelo No. SST-SG10B (negro)
Material Panel frontal de aluminio, cuerpo de acero
Placa Madre Micro-ATX, Mini-DTX, Mini-ITX
Bahías Externas 12.7mm/9.5mm Dispositivo óptico delgado con ranura de carga x 1
--
Internas 3.5" x 2 * , 2.5" x 4*
Refrigeración Frente --
Parte posterior 1 x 120mm 1200rpm 22dBA
Lado Izquierda:1 x 120mm 1200rpm 22dBA (backward compatible with 92mm) 2 x 80/92mm fan slot
Derecho :80mm fan slot
Tapa Air Penetrator 600/900/1200rpm de 180mm, 17/25/34dBA (retro compatible con 140mm)
Parte inferior --
Interno --
Refrigeración aceptada Frente N/A
Trasera 120mm x 1
Tapa N/A
Parte inferior N/A
Slots de Expansión 4
Puertos USB 3.0 x 2
audio x 1
MIC x 1
Fuente de Alimentación Optional standard PS2(ATX) up to 180mm*
Gráficos Tarjeta Acepta tarjetas gráficas de 13,3" (337mm), restricción de anchura – 5,70" (144mm)
Limitación del disipador de la CPU 165mm
Limitación de Fuente de alimentación 180mm
Peso 5.8 kg
Dimensiones 220mm (W) x 295mm (H) x 354mm (D), 23 litros
Adicional support two Kensington locks

Recordatorio
*Si pretende usar todos los espacios para discos duros, por favor retire todos los cables de potencia sin usar. Esos cables sin usar podrían causar problemas con la instalación. Se recomiendan encarecidamente los SSDs en lugar de los discos duros.

*Longitud máxima para FA de 180mm, le recomendamos 160mm debido a las diversas posiciones de los conectores en las FAs y la estructura única de la SG10. No le prometemos que todas las FAs del mercado se puedan instalar en la SG10. Por favor, consulte las guías de este manual para seleccionar su FA.

 




  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R


Describe Ver tamaño Descarga
SG10 manual v2.0 5,635 KB
SG10 High resolution photos 15,391 KB
SG10 eDM (ES-SG10-EDM.pdf)   894 KB

CLEARCMOS Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. Más...
PP05-E Desorden de cables en carcasas y sistemas pequeños significativamente reducido. Más...
AP182 Equip your SG09 with AP182 for crazy airflow. Más...
AP183 Ventilador canalizador de aire de 180mm con PWM y rodamientos duales Más...
FQ81 80mm ultra-quiet PWM fan Más...
AR07 Disipador muy avanzado con tecnología HDC (Contacto Directo de Tubos Isotérmicos) Más...
ET550-B Tutta la Potenza di cui hai bisogno Más...
ET650-B Tutta la Potenza di cui hai bisogno Más...
ST85F-PT Las fuentes de alimentación 80 PLUS Platinum ATX totalmente modulares más pequeñas del mundo. Más...
SOD03 Dispositivo óptico SATA CD/DVD-RW 8X de 9,5mm con carga mediante ranura Más...
3.5” hard drives are cooled by the top 180mm fan.
We recommend using SSD for 2.5” drives as they are more heat tolerant.
The total volume of all possible installed fans adds up to 2.4 liters, which is more than the volume of two 5.25” drives. Since optical drives have the lowest effect on performance, we reasoned that the use of slim optical drive is the best way to reduce the size of SG10.
The top 180mm fan will help to expel power supply’s exhausted air out of the case. According to our testing, the PSU heat will not affect case performance.
Since there are no standards for power supply’s power cord connector location, we provide extra length to ensure compatibility. The SG10 is also designed to accommodate power supply up to 1200W so we used a thicker 15A cable.
By installing the PSU horizontally, it will take up less depth compared to installing it longitudinally. With traditional PSU installation, the power cord will occupy space behind the case therefore the area taken by the power cord is not part of the case measurement.
If your PSU has an AC switch, make sure the switch is at the “ON” position.
SG10 has four fan slots dedicated for graphic cards and provide top-notch cooling ability. If you have installed all extra fans according to our instruction manual and the graphic card still overheats, please contact the graphics card manufacturer for assistance.
The SG10 has 6 fan slots and if you include the fan on the CPU cooler, there are up to 7 fan connectors in total. Currently, there are no motherboards that support this amount of fans, therefore we have included a 1 to 3 fan adapter cable to support more fan connections. Although you can not monitor the fans through your motherboard when connected to the adapter, this is the best way to connect all the fans. Below is a list of Micro-ATX motherboards that has the most fan connectors: 6 Fan connectors: DFI Lanparty JR Series, ASRock X79 Extreme4-M 5 Fan connectors: ASUS ROG Gene Series
Yes it does, with room to spare!
From the tests we’ve conducted during development, a quality tower-style cooler can be used without CPU fan and instead rely only on chassis fans to cool CPU up to 130W TDP (Core i7, not overclocked). However, performance may vary depending on the quality of your CPU cooler and other factors, so you will still need to test the limit on your own.