FT04

■ Incluye dos ventiladores Air Penetrator de 180mm para un rendimiento superior y baja sonoridad

■ Bandeja para la placa base y panel superior extraíbles

■ Filtros de acceso rápido con Tecnología HiFlow para evitar la acumulación de polvo

■ Interior forrado de goma para una mayor reducción del ruido

■ Diseño de flujo de aire sin restricciones con aberturas en ángulo único que minimizan el ruido y maximizan el rendimiento del ventilador

■ Las cómodas sendas de enrutado permiten una excelente distribución de los cables

■ Agarre ajustable para disipadores de CPU y tarjetas gráficas de gran tamaño

■ Canal de flujo de aire independiente para una fuente de alimentación con filtro exclusivo para FA

■ Cabida hasta para siete discos duros de 3,5” y cuatro SSDs de 2,5”

Recordatorio


Ejemplo de radiador de 360mm montado en FT04

 

Especificaciones

Modelo No. SST-FT04B (black)
SST-FT04S (silver)
SST-FT04B-W (black + window)
SST-FT04S-W (silver + window)
Material Aluminum door and top panel, steel body
Placa Madre SSI-EEB*, SSI-CEB, Extended ATX, ATX, Micro-ATX
Bahías Externas 5.25" x 2
--
Internas 3.5" x 7 (2 hot-swap) , 2.5” x 4
Refrigeración Frente 2 x AP182 180mm intake fan 500~2000rpm, 17~42 dBA(compatible with 3 x 120mm fan)
Parte posterior 1 x 120mm fan slot
Lado --
Tapa --
Parte inferior --
Interno --
Refrigeración aceptada Frente 120mm x 3 / 140mm x 2 / 180mm x 2
Trasera 120mm x 1
Tapa N/A
Parte inferior N/A
Slots de Expansión 8
Puertos USB 3.0 x 2
audio x 1
MIC x 1
Fuente de Alimentación 1 x Optional standard PS2(ATX) no length limitation
Gráficos Tarjeta Acepta tarjetas gráficas de 13,3" (337mm), restricción de anchura – 6,69" (169mm)
Limitación del disipador de la CPU 165mm
Peso 11.5kg
Dimensiones 219mm (W) x 546mm (H) x 482mm (D), 57.6 litros
Adicional Support Kensington locks One CP05 included for single hot-swappable SATA hard drive, additional CP05 can be purchased separately

Recordatorio
*The main 3.5" drive cage may need to be removed when installing dual CPU motherboard.

 




  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R


Describe Ver tamaño Descarga
FT04 Manual v1.0 9,685 KB
FT04 High resolution photos 25,094 KB
FT04 eDM (ES-FT04-EDM.pdf)   1037 KB

CP05-SAS Convenient hot-swap SAS / SATA 6G connector. Más...
CP06 Four-in-one SATA power connectors with power stabilizing capacitors Más...
CP07 Cable SATA III con mecanismo de cierre sin roces y conector en 180º. Más...
FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. Más...
FP58 5.25” drive bay for slot-loading slim optical drive and four 2.5” drives Más...
AR07 Disipador muy avanzado con tecnología HDC (Contacto Directo de Tubos Isotérmicos) Más...
NJ600 La fuente de alimentación sin ventilador definitiva con 80 PLUS Titanio Más...
ST1100-TI Fuentes de alimentación 80 PLUS Titanium de primera calidad, totalmente modulares Más...
ST1200-PT El equilibrio perfecto de rendimiento, eficiencia y calidad. Más...
ST1300-TI Fuentes de alimentación 80 PLUS Titanium de primera calidad, totalmente modulares Más...
ST1500-TI Fuentes de alimentación 80 PLUS Titanium de primera calidad, totalmente modulares Más...
It’s possible but for best balance of cooling and quietness, installing a fan directly on the CPU cooler is usually more effective than installing exhaust fan on rear of the case.
The RV04’s airflow path has been optimized using positive pressure design to dissipate heat. The two front 180mm fan will provide equal airflow for both CPU and graphic card area. From our test results, a rear exhaust fan creates an imbalanced airflow that lowers the CPU temperature slightly at the cost of greater cooling performance loss for the graphics card area. Even without an exhaust fan installed the hot air will still exit naturally from the rear. We have also found out through testing that installing a fan directly onto the CPU cooler results in overall quieter case compared to having a fan mounted in the rear exhaust fan slot due the latter’s more exposed location and turbulence against the fan grille. So with all things considered, an exhaust fan is unnecessary with this case’s design, but the rear fan mount is still included for convenient placement of all-in-one liquid cooling solution.
The RV04 was designed to achieve optimal silence so there are no fan guards in front of the front fans to reduce noise associated with air turbulence. To reduce the chance of foreign objects touching and damaging the spinning fans while the system is on, we recommend only removing and cleaning the filter when the system is off.
A. If your fan is connected to the motherboard, we suggest you to turn off temperature control function in the BIOS. If you want to use temperature control function on your motherboard, we recommend you to set the RV04’s physical fan speed switch to high for a lower starting voltage and a wider range of control. If the fans still do not spin, please contact reseller or SilverStone to arrange for replacement.
This chassis supports Kensington security locks to prevent not only the entire chassis from being taken when locked but can also prevent theft of interior components. If the top cover can be removed independently then there is no point in having Kensington lock holes in the first place.
Customized liquid cooling systems do not have a definite installation procedure. Typical chassis will not have provision for this. DIY users must make provisions themselves. If you want to install a 3 x 120mm radiator, we recommend Magicool Dual 180 Radiator instead as a better alternative.