FP56

■ Convient à tout emplacement 5.25”.

■ Complètement compatible avec les cartes SDXC

■ Trois USB 3.0 et un port de recharge ultra rapide

■ Prend en charge deux disques durs de 2,5" ou des montages de SSD

■ Compatible avec les connecteurs internes USB 3.0 (19pin)

 

Spécifications

Modèle N° SST-FP56
Matériau utilisé SECC
Couleur Noir avec un panneau supplémentaire couleur blanc et argent
Application Baies de 5, 25”
Front I/O Ports 3 x USB 3.0 et 1 x port de recharge
Interface USB 3.0 (5Gbps)
Media card support SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF (UDMA7)
Systèmes d'exploitations pris en charge Microsoft Windows 10/8.1/8/7/Vista (32-bit, 64-bit), et futures versions
Mac 10.2.8 et au dessus
Dimensions 148mm (W) x 42.3mm (H) x 176 mm (D)
Poids 540g
Remarque :
*Red charging port supports power charging for all USB devices, but data transfer is supported only for USB 3.0 devices. Blue USB ports support charging and data transfer for all USB devices.
 
  • Téléchargements
  • Recommandations
  • Tests de products
  • Q&R


Describe
Ver
Taille
Téléchargement
FP56 Manual v1.0 1,276 KB
FP56 High resolution photos 6,828 KB
FP56 firmware V1 281 KB
FP56 eDM (FR-FP56.jpg)   178 KB

EC04-P
USB 3.0 expansion card with two external ports and one dual port internal connector. plus...
PS07
Redefining the value Micro-ATX chassis plus...
PS10
The Precision series PS10 is an affordable ATX tower case built for silent operation. plus...
Your motherboard may have USB standby or +5Vsb turned on for the ports connected to FP56, this function allows you to turn on computer via keyboard or mouse connected to USB port. If you do not need this function and wish to have FP56’s LED remain off after shutting down computer, please disable “USB standby,” “+5Vsb,” or other similar functions from within the motherboard BIOS menu (refer to your motherboard manual for instructions).
Please screw mounding screws on upper row or use shorter screws which included in FP56.