FP56

■ Supporta qualsiasi alloggiamento esterno da 5.25”

■ Supporto per card SDXC

■ Tre porte USB 3.0 ed una porta di caricamento ad alta velocità

■ Supporta due dischi rigidi 2,5" o SSD

■ Supporta connettore interno standard USB 3.0 (19pin)

 

Specifiche

Modello nr. SST-FP56
Material dell'enclosure SECC
Colore Nero con pannello frontale bianco e argento
Appliacazione Alloggiamento da 5.25”
Porte frontali d'entrata/uscita Tre porte USB 3.0 ed una porta di caricamento ad alta velocità
Interfaccia USB 3.0 (5Gbps)
Supporto media card SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF (UDMA7)
Sistemi operativi supportati Microsoft Windows 10/8.1/8/7/Vista (32-bit, 64-bit), o versioni future
Mac 10.2.8 o superiore
Dimensioni 148mm (W) x 42.3mm (H) x 176 mm (D)
Peso 540g
Osservazioni :
*Red charging port supports power charging for all USB devices, but data transfer is supported only for USB 3.0 devices. Blue USB ports support charging and data transfer for all USB devices.
 




  • Downloads
  • Raccomandazioni
  • Recensioni Sull'articolo
  • Domande e Risposte


Describe
Ver
Taglia
Download
FP56 Manual v1.0 1,276 KB
FP56 High resolution photos 6,828 KB
FP56 firmware V1 281 KB
FP56 eDM (IT-FP56.jpg)   176 KB

EC04-P
USB 3.0 expansion card with two external ports and one dual port internal connector. altro...
PS07
Redefining the value Micro-ATX chassis altro...
PS10
The Precision series PS10 is an affordable ATX tower case built for silent operation. altro...
Your motherboard may have USB standby or +5Vsb turned on for the ports connected to FP56, this function allows you to turn on computer via keyboard or mouse connected to USB port. If you do not need this function and wish to have FP56’s LED remain off after shutting down computer, please disable “USB standby,” “+5Vsb,” or other similar functions from within the motherboard BIOS menu (refer to your motherboard manual for instructions).
Please screw mounding screws on upper row or use shorter screws which included in FP56.