FP52

■ 精密风扇控制逻辑

■ 广泛温度控制范围

■ 特别天蓝霓虹灯LCD

■ 精致铝合金面板与抛光按键

 

規格

颜色 黑, 銀
材质 铝合金面板, 钢铁侧板
冷却系统 双进风风网
应用 5.25” 磁盘盒
风扇电力 0V, 6 ~ 12V
LCD显示 温度, 风扇转速, 闹钟, 时间, 系统状况
温度幅度 0 ~100°C
线长 800 mm
净重 220g
尺寸 158 mm (寬) x 42 mm (高) x 85 mm (深)
备注 :
一个路线最高输出- 0.8amp (9.6W)
三个路线结合最高输出- 1.5amp (18)

 




  • 文件下载
  • 推荐产品
  • 产品评测
  • 问与答


描述 版本 大小 下载
FP52 說明書 v1.0 1,298 KB

FT01 Performance Standard ATX tower chassis with aluminum unibody 更多...
RV01 Extreme enthusiast extended ATX tower chassis 更多...
SG12 Refinement of classic small form factor case 更多...
Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.
Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.
Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:
http://www.silverstonetek.com/contactus.php
Please check to see if the battery for the FP52 is properly seated in its slot. If it is, then the battery may need to be replaced. The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.