DIY Parts     ES02-PCIE

■ Control your computer from anywhere in the room using 2.4GHz RF remote

■ 2.4GHz receiver PCIe card included

■ Works as far away as twenty meter

■ Includes power / reset switch Y cable

■ Includes optional low profile expansion slot cover

■ Integrated PC speaker on receiver assist in providing auditory feedback while in use

         ES02-PCIe is a convenient remote switch kit designed by SilverStone to wirelessly turn on / off and reset a computer. By utilizing existing standard 2.4GHz RF wireless technology, PCI Express x1 slot, and power / reset pin headers on a motherboard, the ES02-PCIe kit is easy to install and use within 20 meters of a connected computer. An included Y cable ensures your computer case’s own power and reset buttons can be used concurrently with the ES02-PCIe if needed. Users looking for a simpler security solution than software access control will find ES02-PCIe to be a good alternative. Those with computers located in hard to reach area or has special usage scenarios will also find the ES02-PCIe to be very handy.


Model No. SST-ES02-PCIe
Adapter card
Adapter form factor Low profile PCIe x1
Operation frequency 2.4GHz
EIRP 3.76dBm (Measured max.)
Operating range 20 meter (Free space)
Environment Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Storage temperature: -40°C ~ 70°C (-40°F ~ 158°F)
Operating humidity: 10% ~ 90% non-condensing
Storage humidity: 5% ~ 90% non-condensing
Net Weight 29.6g
Dimension 120mm (W) x 21mm (H) x 68mm (D)
4.72" (W) x 0.83" (H) x 2.68" (D)
Remote control
Operation frequency 2.4GHz
EIRP 3.76dBm (Measured max)
Operating range 20 meter (Free space)
Battery type CR2032 (Lithium manganese button battery)
Nominal voltage DC 3.0V
Battery environment Operating temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Storage temperature: 10°C ~ 40°C (50°F ~ 104°F)

2.4GHz wireless computer power and reset remote switch more...
ES02-PCIe manual
458 KB
ES02-PCIE High resolution photos
7,844 KB

ES02-PCIE eDM (es02-pcie-edm-en.pdf)
576 KB

A:Please check if the LED indicator blinks when pressing the Power or Reset button, if it doesn’t blink, then you should change the battery.

If it blinks, but still can’t turn on the computer, please try the following steps:
  • Unplug the computer’s power cord, pull and insert the card several times and check if the expansion slot is dirty. Use an eraser to clean the gold fingers (connector’s metal pins), then re‐insert the card.
  • Check if the POWER SW and RESET SW are connected in the correct position, be sure they are not loose.
If these steps do not work, then check in motherboard’s BIOS / UEFI menu to make sure PCIe functions have been enabled.

Step 1 : Re‐sync the switch and the card.
Step 2 : Press any button on the remote until the indicator light turns off on the ES02-PCIe adapter.

A:Please make sure USB standby function is turned on for the pin header the ES02-PCIe is connected to in the motherboard’s BIOS / UEFI setting. If your case is made of metal, the remote control distance will be affected. The affected distance will vary depending on material composition, thickness, and ES02-PCIe’s relative location inside the case.

A:he default configuration from the factory is set to have the PC speaker on so that users can discern if the receiver is responding to the remote. To turn off the integrated PC speaker on ES02-PCIe’s receiver, please move the jumper to the left side on pin 1 and 2.

A:When pressing the remote control button, please make sure LED on the remote control is responding as well as it indicates if the remote control is sending signal.