ECM25

■ Converts one M.2 port (M key) into one PCIe x4 interface

■ Only 32mm tall when installed, easily fits in 1U chassis

■ Built-in LED indicator for showing PCIe NVMe status

■ Supports 2230,2242,2260 and 2280 length M.2 SSD

■ No driver installation required


Remark

There are three types of M.2 SSDs, please make sure you know the difference between them and whether your system/motherboard support them before pairing these with your SilverStone product.

SATA (B key)
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.

PCI Express using AHCI (M key) only support to install this type
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.

PCI Express using NVMe (M key) only support to install this type
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.
The following SSD models have been tested and verified by SilverStone to work optimally with the product presented on this page.

 

SPECIFICATIONS

Model No. SST-ECM25
LED indicator PCIe M.2 SSD Read / Write LED: Blue blinking
Interface PCI Express x 4
SSD Interface M.2 (NGFF)
Module Key PCIe x 4 NVMe-based M key
Operating system support Microsoft Windows 7 (32bit/64bit), 8/8.1/10 (32bit/64bit) or future release version
Mac OS 10.2.8 or above
Linux
Net weight 11.5g
Support Length of M.2 SSD 30mm, 42mm, 60mm, 80mm
Dimension 32mm (W) x 6mm (H) x 100mm (D)
1.26" (W) x 0.24" (H) x 3.94" (D)
Remark :
* If you wish to boot off using M.2 SSD, your motherboard needs to support it. Due to BIOS limitations, not all motherboards support booting off M.2 SSD so please consult your motherboard manual or vendor for more details on how to enable this function.
* M.2 PCIe-NVMe mode SSD requires the use of Intel® 9 series (Z97 H97 Z170 X99) or higher version chipset motherboard with Windows 8 or higher version operating system.
  • RECOMMENDATIONS
  • PRODUCT REVIEWS
  • DOWNLOADS
  • Q&A
ECM20
Dual M.2 to PCI-E X4 and SATA 6G adapter card more...
ECM21
M.2 (NGFF) to PCI-E x4 adapter card more...
ECM22
Dual M.2 to PCIe x4 NVMe SSD and SATA 6 G adapter card with advanced cooling more...
ECM23
M.2 NVMe SSD to PCIe 3.0 x 16 adapter with heatsink more...
ECM24
M.2 NVMe SSD to PCIe 3.0 x4 adapter with heatsink more...
TP01-M2
M.2 SSD thermal pad more...
TP02-M2
M.2 SSD cooling kit more...


Describe
Ver
Size
Download
ECM25 manual V1.0 434 KB
ECM25 High resolution photos 4,635 KB
ECM25 eDM (ecm25-edm-en.jpg)   416 KB


No such information.