Mobile Series     MS10



■ Supports 2242, 2260 or 2280 form factors of B key M.2 SATA SSD

■ All aluminum exterior with small, pocketable design

■ Supports USB 3.1 Gen 2 interface up to 10Gb/s super speed transfer rate

■ Supports USB Attached SCSI Protocol (UASP) function

■ Includes write protect function

         To take advantage of increased popularity of M.2 SSD drives, SilverStone created the MS10, a robust and pocketable M.2 SATA external enclosure. It is designed to support a M.2 SATA SSD up to 80mm so users can install either newly-purchased or repurposed M.2 SATA SSDs from laptops into the MS10 to make a high-speed USB flash drive. To make the most efficient use of M.2 SATA SSD, it also has USB 3.1 Gen 2 interface for up to 10Gb/s super speed transfer rate, providing fast reading and writing compatibility. Lastly, the MS10 is designed to work without additional driver installation, so it can be carried anywhere conveniently and be used on nearly any PCs.



Remark

There are three types of M.2 SSDs, please make sure you know the difference between them before pairing these with your SilverStone product.

SATA (B key) only support to install this type
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.

PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.

PCI Express using NVMe (M key)
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.

Please note: The MS10 is only designed for M.2 SATA SSD, it is not compatible with NVMe SSD.
 
 
 


Model No.
SST-MS10C
Color Charcoal
Connector USB Type-C
Data transfer rate USB 3.1 Gen 2 up to 10Gbps (Compatible with USB 3.0/2.0 /1.1)
Material Aluminum
Controller JMicron JMS580
Support type of M.2 SSD B Key SATA Type M.2 SSD x 1
Support 22 x 42 mm, 22 x 60 mm or 22 x 80 mm size
LED indicator Solid White: Powered
Blinking White: Reading / writing
Solid Red: Powered (write-protection mode)
Blinking Red: Reading (write-protection mode)
Operating system support Microsoft Windows 10/8.1/8/7 (32bit/64bit) or future release version
Mac 10.7 or future release versions
Net weight 59g
Dimension 35mm (W) x 11mm (H) x 104mm (D)
1.38" (W) x 0.43" (H) x 4.09" (D)

Remark
* If you wish to change MS10’s write-protection mode, please disconnect it from computer first before flipping the switch to enable or disable write-protection.
MS09
M.2 SATA external SSD enclosure with USB 3.1 Gen 2 more...
MS09-MINI
M.2 SATA external SSD enclosure with USB 3.1 Gen 2 more...
 
 
Describe
Ver
Size
Download
MS10 manual
 V1.0 
1,577 KB
     
MS10 High resolution photos
  
1,760 KB
     


MS10 eDM (ms10-edm-en.jpg)
 
532 KB


No such information.