SilverStone FS305-12G INTRODUCTION

FS305-12G

Three 5.25" device bay to five 3.5" SAS-12G / SATA-6Gbit/s trayless hot-swap cage

￭ Fits five 3.5" SAS-12G/SATA-6Gbit/s drives in three 5.25" device bay

￭ Adjustable drive status LED and fan control system

￭ Trayless & screwless design

￭ Individual metal key lock for each drive for extra security

￭ All aluminum body with beautiful hairline brushed finish

￭ Independent drive status LED

￭ Built-in cooling fan for excellent heat dissipation

￭ Fully supports Hot-Swap function

Fit into three 5.25” device bay

Support up to SAS 12G/ SATA 6Gbit/s device

Trayless & screwless design
Fully supports Hot-Swap function

Individual metal key lock for each drive for extra security

Fits five 3.5" SAS/SATA 6Gbit/s drives in three 5.25" device bay

Adjustable drive status LED & fan control system

Rear view

Individual metal key lock for each drive for extra security

Aluminum front bezel with plastic clip buttons

Independent drive status LED

Built-in cooling fan for excellent heat dissipation

Support five 3.5" SAS/SATA HDD or SSD

7-pin SATA connectors

SATA 15-pin power connector

SPECIFICATIONS

Model No.	SST-FS305B-12G
Color	Black
Material	Aluminum and front bezel with plastic clip button
Form factor	5.25” drive bay x 3**
Drive support	5 x 3.5” SAS*/SATA HDD or SSD
Transfer rate	Up to 12 Gbit/s (dependent on drive speed)
Host interface	7-Pin SATA connector x 5 or SAS* primary channel connection
Power connector	SATA 15-Pin x 2
Drive tray security	Triangle metal key lock design
LED indicator	Power ON : Blue Accessing : Purple blinking
Number of key	2
Switch button	Fan speed:High/Low HDD LED:ON/OFF
Cooling fan	80mm fan x 1, 3000rpm
Net weight	1.40kg
Dimension	146mm (W) x 126mm (H) x 199mm (D) 5.75" (W) x 4.96" (H) x 7.83" (D)

Remark

* Your system must have SAS controller if you want to use SAS HDD.
* Hard drive capacity and RAID support is dependent on SAS or SATA controller used.

** FS305-12G is designed for maximum space utilization. In order for it to fit five 3.5” drive bays into the space of three 5.25” bays, its sides are flat with no cutouts for fitting between 5.25” bays with protruding lip or brackets. Therefore, please make sure your case has 5.25” bays that are also flat on the inside with no protrusions. If not, please consider using FS303 or FS304 instead.